The Jalopy Journal
Thanks for all the replies. The "best" I've got currently is 1.5" x .160 and the next best is 1.3" x .120
This is why I love this site and also another reason why one should be patient and try and look at as many ways of doing something as possible....
I'm about to start fabricating a rear panhard bar for my '34 Chev project but was wondering if it can be a bent tube or does it have to be...
Do you apply the heat just to the two ends of the pin? I need to do my '38 Ford axle's pins and I'm already thinking it's gonna be a mission....
Yeah, the theory as I've always understood it is that if you make changes to the exhaust system to make it less restrictive you have to compensate...
You're welcome. It's always a pleasure to share!
A standard steel rim fits but only just. There's only about 1/8 clearance between the rim and the calliper. Aftermarket wheels might therefore not...
These are also called "Trafficators". I recently got a 12V set off E-Bay that came from a 50's Morris Minor. They wire up real easy. The...
No, unfortunately not. I was in a bit of a rush. The owner was on his way out when I got there. I only had about half an hour or so and my main...
Yes, as far as I know we did.
bttt
Even here in South Africa the Morris wheel will be easier to get as it was a popular car here. People are still rebuilding them to a large extent...
OK...that's cool... Thanks Rocketeer I'm still gonna use it for my '34 in any case because I think it should look cool...or what do you think?
This is actually a Chevrolet: [IMG] [IMG]
[IMG] [IMG]
This Chevy was sold for the equavalent of about $6000 : [IMG] [IMG] [IMG]
[IMG] [IMG] [IMG]
About a year ago I also posted some pics from this place. In the mean time the guys has moved and has actually got quite some more now....
I got this banjo steering wheel today 'cause I think it'll be nice for my '34 Chevy project. Only thing is I don't know it's origin. Anybody...
Unfortunately these never arrived. I can only guess they went missing in the post. So, I bought another pair. As I've said before, I'm going to...
Exactly what I did. In other words, the 2 center bolt holes on each side are now open slots because of the bolts sitting upright. I actually used...
Here's that thread: http://www.jalopyjournal.com/forum/showthread.php?t=150434
This is where my wife said I'm to finish one first before getting another: '34 Chevy 4-dr sedan (started building the chassis) '52 Chevy DeLuxe...
Yeah, the size designator is in fact the throttle bore size. The venturis are removable and the smaller venturi you install the lower the rpm...
Basically the same situation here in South Africa too. You might have to have a new face custom made if you're set on having it in KPH.
Some more I have: 1. 34 Chevy - Recently started a chassis for it. Will be a fenderless hot-rod. 2. 52 Chevy Deluxe - Very solid car to be...
Separate names with a comma.
The Jalopy Journal
