The Jalopy Journal
My wife actually bought me one of those shirts thinking it was cool. I really liked it until now... Might break her heart if I don't wear it...
Depends what you're looking for I guess, and what size chambers you need. You're probably gonna need to find out what size chamber you have...
I'm surprised nobody has mentioned it yet, but I'm considering GM Indigo Blue for mine. It's the same crap that's on a ton of Silverado's,...
Maybe my system is a little different, but my hose just runs all the way to the bottom of my bottle and flows in and out without a problem. No...
On the jar idea, I'm sure it'll take the coolant. I've been using a heavier plastic water bottle for a while now and it hasn't melted yet.. If...
To my knowledge, if you replace the whole third member, then you should be ok. Within 3rd members, there were different carrier bearings and...
I was there.. I was kinda stuck back in the corner because I got there a bit late. I actually got an trophy for "rust to resto". Not sure what...
What trans? Ratios all make a big difference. Check out this page with the starting line ratio, I got mine right in the sweet spot and I love...
Nobody? Maybe back to the top for the night crew...
Just wondering who's going to be there on Sunday? I searched and didn't see anything about what's going on this year. I've gone the last few...
I was just in Texas... Too hot! Unfortunately I brought the heat back home with me... :( Welcome!
No problem. I just thought they're cool because they can fit anything. Good luck!
Are you making them from scratch? I made mine and used a heim joint on both ends with opposite threads so turning them one way lengthens and the...
I'm not a fan of fat fendered cars without fenders. I pondered it briefly with my car but quickly decided against it. Good luck..
I made a set of traction bars similar to cal tracs and they seem to be great. If you think about how they work, they shouldnt change the ride...
Ditto, had a head crack and leak into the header flange bolt hole and into exhaust...
I'm thinking I might do thread in studs as well to save a little bit of meat in between the holes. I've got another project I'm working on right...
I can't help you with the 8.5 wheels, but my avatar pic is 235/60/15's. I think they look just fine on my car, but that's just me. What sizes...
Thanks!
Sounds like a flasher to me. It's also cheap and easy to replace so I'd start there too..
Why do you have to machine the front? Sounds like you're talking about the inside of the flange so that the studs will sit flat? I know some...
This is exactly what I wanted and pretty much what I'm doing. I'm using bronco axles too but they're Yukon replacements.. Thanks everyone for your...
Adapters cost almost as much as it costs to have moser do it themselves. Plus the real problem that I have is the access hole being in the way,...
Garrr... 1/8" is plenty, 1/8" isn't enough... Has anybody done it with that little space and survived to tell me about it?
Yes. Yes it is! I appreciate all the other ideas though!
How much space between the old holes/access hole and the new lugs is acceptable though? I'm looking at the template that I made with both...
This is what I want to do. How close were the holes to the access hole/existing holes? I'd rather drill without welding if I can. Moser is...
Is the balance issue sideways or top to bottom balance? I know moser doesn't cost a ton but shipping both ways is a pig too.. Rocky- did those...
WHen he welded them in, did he take a slice out of the flange to make sure it wasn't warped?
I've read some of the threads about drilling 9" axle flanges to change the bolt patterns, and I know there are some people out there that think it...
Separate names with a comma.
The Jalopy Journal
