The Jalopy Journal
I wonder if a set of those spring helpers like they sell at Autozone would help without raising it up. I'm talking about the short one that...
Anybody? What I was thinking of doing is getting the 2 outside teeth and putting them on where the outside 54 teeth would go. I'm missing those 2...
It's a sbc. Engine, trans, and the rear is out of a 79 Camaro. The master is on the fire wall.
I don't know much about GM's manual transmissions so here it is. I already have my 54 Chevy set up with a 350 t auto trans and I'm now wishing...
My girls and I shortly after getting my 54 out of the body shop. [IMG]
The fact is we will all be old some day and it will be hard to give up something that you enjoy so much. Just looking at it from the other side....
I don't have a picture but I use a modern plastic Ford tank but instead of putting it under the hood I hid it behind the front bumper on the...
Very cool. Like others have said get it running and driving then start the customizing.
Thanks.
I don't have any really good pictures but this is the one I have for my background. [IMG]
A clay bar is a bar of clay. You use some spray on wax for a lube and rub it over the paint. It will remove dirt that is stuck in the pores of the...
Breaking the bead on the tire is the easiest and neatest way to do it. You don't need a tire machine to do it just a car or utility trailer....
Here is my driver 54 in Chevy orange. [IMG]
After looking at all of your opinions I decided to stick with the wheels and tires that I already have and lower the rear down and get some better...
I love it the way it is. I really like the look of your chop, it's perfect.
An original bar should be chrome but I'm not an expert on those ether.
I have white letters on the rear of my 54 but they are facing into the fender well.
You could be a cheap a$$ like me and just not get a full set of teeth.:D [IMG]
Late 40's microphone shift knob. [IMG] [IMG]
Great looking ride!
I love seeing past and present pictures like this. Very cool!
I must say I'm digg'in your ride. Just drive it for now and if you fall in love with it restore or customize it down the road. Have fun with it!
Good daily drive the way it sets. Puts some loud pipes on it and some nice caps.
Thats what I was looking for. Thanks guys.
Is there anyway you could use the 54 turn signal housings with the Pontiac center. From the pictures it almost looks like it would match up pretty...
They may be out there but I haven't had any luck locating some. Hopefully someone will chime in with a dealer or website.
I'm looking to drop the rear of my 54 about an inch and a half but can't seem to locate any blocks that are the right width. Does anybody make...
This is the best suggestion yet!:D
The shifter is just a cheap B&M shifter, I don't remember the model. I just took a cheap plastic knob and took the insert out and fixed it into...
Separate names with a comma.
The Jalopy Journal
