The Jalopy Journal
You win if you didn't have to spend you time and it was still cheap! :) Everything you tested sounds right to me. I usually do the port...
I built my flow bench for about $200....I am a cheap bastard :)
that's right......limit the flow at the engine and the boost will go up to compensate. It's a positive displacement blower so one way of the...
I think he means cut the chambers deeper not mill the gasket surface.
Dynomation5 does a decent job simulating header options but for me what's always worked best is to just ask burns stainless what they recommend...
The silly question I'm going to ask is can you use actual o-rings on the water passages and not thing about it again?
Ahhhh.....that's what I was looking for :) Mark
questions. I read 16psi and you're running gas right? but I don't see an intercooler? Do the rules not allow it? Without one you have to be...
Somehow I missed this thread? :( But I found it now! :) Congrats on Ohio! I'm looking forward to the flow test results.....to steal the...
I've really been struggling to find time..... The oil pump is out thanks to my 3ft crescent wrench. I guess the issue was it is seized so it...
Thanks Frenchy! I'm scared to take them though because I'm not exactly sure what I'm planning cooling system wise and would hate to have you...
I've been playing a little with what maybe could be done piston/chamber wise and very honestly it's hurting my brain a bit. Here's a couple...
Frenchy, are those something you made up or did you find them somewhere?
Here's where my brain is headed on the piston......I guess I really need to draw up the cylinder and head so it's a little more clear what this...
Yeah, the outlet could be kept on the front then get things balanced better with throttling. Throttling solutions are flow rate sensitive which...
Thanks Mike, those are great pics. I am concerned about the cooling and the more I read and look at the parts the more concerned I get. A...
I guess I need to take a good long look and see who's got the biggest pump that will fit. I'd much rather waste a little hp with maybe unneeded...
Thank you Bruce! doesn't somebody make a high volume pump for the ford....Melling? or is that what you're talking about? Ah, this guy:...
Be sure and check the tracking number because you get a number when you start shipping paperwork and that different from actually shipping anything.
Separate names with a comma.
The Jalopy Journal
