The Jalopy Journal
Its a question like this that makes the ordinary joe feel like he knows nothing. I don't see any difference between the first example of the two...
My grandaughter on her first freewheelin adventure and her trying to get that elusive duck. She lives a few hundred miles from me, but I will get...
If you have enough flex hose to put a loop in it, thats what I did.
Does the carb have an electric choke and have you checked it for proper operation and voltage?
http://www.summitracing.com/parts/sum-381106/overview/ Nice job not many people try making the square to round fittings. When you get in the...
Early ford 9 inch pick up, 63-65, 5 on 5 1/2 bolt pattern, big bearing. Take parts to Napa they will match
http://www.wheelvintiques.com/ HRP you are not the only odd duck. Check part # 3000-15 these might work for ya
Post # 9 addressed the issue. Turbulance inside the shroud cavity will send the air the opposite way. Did duct design for years and we found when...
Put a paper towel on the front side of radiator w/motor running at about 2000 rpm, it should stay put down to approx 1400, if not your having air...
Sounds like a fuel issue to me and I would check the choke system, symtoms sound like choke.
You say 6-8 grand for a 4 door, why not invest 3-4 grand on a reputable body man for your panel repairs. Use the 350, 336 gears and a 700r-4 or...
This mount will work but will require boxing of the frame approx 9 inches in each direction of centerline of mount. I would also recommend...
Pull the timing cover, look for bad timing chain, rubbing parts and do the timing marks align correctly to cam specs at TDC
I agree. I don't see where the OP addressed the pushrods. If you have guide plates are they correct for the pushrods. As the pushrod rotates, if...
http://www.mcmaster.com/#tapping-screws/=sulodt This place will ship directly to your home. I use this place all the time for fasteners. Saves so...
I made the panels for my last three projects and what I liked about was being able terminate each wire to the panel and have no excess wires...
Whatever red I put on my car is the perfect red at that time
I commend you for taking this project on and mentoring the youth in the build. You have your hands full overseeing this project with such a high...
This is good advice and definetly will use it in this project Thanx Thanx, I have them installed in my favorites and am now looking at their...
I am getting ready to purchase a wire kit. The three places I am looking at are Rebel wire, they have a rear trunk kit that looks good, Painless...
"Just want to make a cool "suv" for the family" Have you ever rode in one of those for any lenght of time? I would think if it was a suv for the...
I second the beverly. When I first started in the sheet metal trade in 1973 the beverly was one of the most common tools alongside the brake. Cut...
This post is dangerously close to infringing on rule # 2 of the HAMB
Maybe you need to get your brother and summershow together. A deal may be in the future here.
All threee of those project choices are dedicated builds. If you choose to sell and wait for the right car to come along your kids could be gone...
Stainless will work but you have to get the right grade which usually means you don't get them at your local hardware or auto parts house. A grade...
I would say accelerator pump would be my first check, than fuel pressure. Accelerator pump may have the old leather seal and it has dried out
Flat paint has been here in every decade since I was born and before and still here in 2014, so if anything carries the title of traditional, than...
I probably don't have that much to add and no where near as valualble as already posted. I would think with so many different variables in a...
Separate names with a comma.
The Jalopy Journal
