The Jalopy Journal
Had a vibration with my T5 that is behind a 283 in my 34 but the vibration was only during acceleration and got worse the higher the gear....
You can fix it right once or wrong twice if hyd oil is leaking the seal is worn or the metal has wear or damage. Stop leak will cause more...
love the turbo jet on the lower front fenders. Man that is as nice as they come grate job. so whats the story on the turbo jet flags?
a good 6 point socket and a impact driver. spay with KROIL oil and them try with a big hammer and some heat.
We use the blue at work a lot and the red is some bad stuff If it is used on aluminum the threads will be pulled out if you have to remove the...
The gasket is made with a crush factor in it, if it needs any other sealant the manufacturer of the gasket would have called for it. Clean both...
we use about 2 cup but that is in a big 12 to 20 Gallon radiator in a tractor or over the road truck.
would like to see the rest of the ride
We use powder cascade to clean out radiator and cooling system, Drain the coolant and fill with just water and the powder cascade then run for a...
I would put it back together and run it. Once the thermostats in the nut can not pass through it if the water flow was strong enough to pick it...
A good way to check for exhaust into the cooling system is to take a bottle that you and see through fill it with water then put the over flow/...
Just me, I woun't spay WD-40 on a cats a_s to help pull a string out. Just don't like that stuff.
You can use a small compressor off a small four cylinder and make your own mounting brackets. Their is after market systems out that have every...
Agree with boneyard51 kill the water at the source , I use N A P A air tool oil. I use mine every day at work and get years of service from them
All we can do is pray and hope for the best but it looks like some are going to have a lot of water to deal with. God Bless them.
Your project is looking great, but i do have a couple questions, Is the straight six going to work with the five speed? I have been told that over...
Any one know if they are still going to Darlington tomorrow now that we are having a mandatory evacuation east of I-95 through out the state.
ever had a rear main seal leaking? still drove the the wheels off and it never had a clutch problem. drive it
Great to see some cool cars really get drove some wheres. :D
a long time ago. But it is really cool some one will know
put a for sale in both witch ever one goes first gives you the answer.
Thanks to every one who helps get this together and all that came out to make a great time, Hope we will see a few more pictures that other took...
Is any one reading this? Just days away now OK now we have food some drinks [sodas] the over hang and the beach. The only thing we need now is for...
If you pull the starter to have it tested you can inspect the ring gear by looking in the starter hole take a yellow or white paint and mark a...
As we work on different projects who is it that comes to our aid when help is need. Here is a changes to say thanks to the guy's or gal's , who...
O K new motor in and ran, did cam brake in then adjusted the valves and reset the timing. Took it out for about 30 min drive, every thing seams to...
I'll be there, Got the new motor in today should run tomorrow. So if I have worked this hard getting ready and all you have to do is show up....
I see that someone here on the hamb has one for sale. What is it and what's the history of it. Have never seen or heard of it
It's almost here again hope some of you that have not made it out in the past will come on out this year. Thanks Andy for the picture of the...
google Road side America and you will find all sorts of cool things and places. Good luck and have fun
Separate names with a comma.
The Jalopy Journal
