The Jalopy Journal
Not Sure but I can't pull the arm out even if I use pliers to get a solid grip on it. they both have at best 3/32" of movement. I checked another...
For a Distributor thats OEM application is a 1961 Willys FC-150 with a 134F I don't think so.
[IMG] [IMG] [IMG] Nothing inside which looks to be an adjustment. The advance that is in the distributor the stop is about 1/4"" away from the...
I have a Prestolite IAT-4405 Distributor I got it NOS. I also found what I believe are some NOS vacuum advance cans for it. Standard VC-110 the...
28" tall tires with a 3.73 final is 67mph at 3000rpm P235/75R-15's are 28.5-29" tall depending on brand etc.
This is a Huge thing in the Willys Jeep world. Both because of swapped parts and reproduction parts. Guys are always swapping grills and trying to...
WOW
How about a Hot Rod Willys 134L [img]
Oh this is easy your shop or garage is the right size when your estate sale can be layed out in it and people have enough room to move around...
Look at some of the Aluminum Drink bottles you can put one in a lathe or drill press and spin it then using Gray Scotchbrite remove the lettering...
Yes sir but its a hot rod too. Souped up flat head and more mods then you can count. [img] [img] [img] [img]
Been there a few times. I keep threatening to go by and see if he has any Willys 134L stuff. They made speed equipment for the Jeeps back in the...
I got four shift knobs on my hot rod but I'll just show them all off. [img] The Tee handle is a hand throttle the push pull is the rear axle...
In the US the 215 was only used in a few smaller cars from 1960 to 1963 thats a pretty narrow source some 55+ years later. In England Rover...
I sold my 66 Chevelle Malibu late 1970's street racer project to help fund my 48 Willys Jeep. The Chevelle was a finished rolling chassis a...
Also keep in mind that even though Prohibition ended on a Federal level December 5, 1933parts of the country were dry well after that Kansas had...
My Grandmother saw that car when they brought it through Coffeyville, Kansas. She said the Brains and blood were still stuck to the headliner and...
On my 48 Willys CJ-2A build since I live in Western Oregon and it rains anywhere from a light mist to a torrential downpour. I went with a...
90% of people looking at my Willys see an Army Jeep. the fact its a Civilian Jeep made in almost the same numbers as the Military jeeps has...
KH made wheels for Willys both 5 and 4 lug. A NOS Willys Wheel 5 on 5.5" with a 4.28 center hole would bring North of $100 the repops are $125. So...
Howdy I have a 0-6000rpm Dixco tach (looks similar to a Sun Super II) and for the life of me I can not see how to change the internal lighting...
I had a 36 spline to 3/4" round connector on my Willys Jeep Build. I just couldn't see drilling a couple of pin holes to anchor the round side. SO...
Granted us old guys can't be doing that stuff any more but be assured that stuff is still going on. Just different cars and of course younger...
Granted not cutting stainless. but what I did to add two holes to the dash of my Willys Jeep was to first drill a pilot hole 1/4 exactly center...
I agree 1/4" in not much clearance but Willys Jeeps were just not designed to wear a TRI Y header designed and built by a guy with no experiance...
I'm setting up my steering and I find that the shaft coming from the box and the column shaft do not meet centered they are off about 3/8" from...
Check out Walcks on line Willys CJ's and 4cly powered Kaiser CJ's used a screw in PCV with 1/4" NPT threads.
Bubba Willys jeep guys do it all the time. The Willys engine uses a 5/8" wide belt but when the guys swap an alternator into cause the Gen has...
Got my temp spray booth all sealed back up and ready to spray a couple more coats on my 48 Willys Project. The paint I laid on it last memorial...
I am building an Aluminum hard top for my 48 Willys CJ-2A the top will have Suicide Doors. I want to be able to put some sort of remote solenoid...
Separate names with a comma.
The Jalopy Journal
