The Jalopy Journal
That are an air filter!
My partner Ron and I will be setting up next to Gene Winfield in the swap meet area. We will have all the cool stuff like flathead magnetos,...
Norm Grabowski? He passed away so you'll have to wait a while!
CORN STARCH! That is the correct additive. Or you can simply buy universal flatening agent from your body supply house.
There is a jewlers punch set that will punch holes (discs) from up to 14 gauge sheet. Use them to plug your holes. As suggested earlier, weld from...
I have seat springs.... I to am in NY pm me and we'll get together!
What I did was to put the spring over the shifter and put 3 wire ties through the spring with another around the 3 so that would not slide...
I would highly recomend ABS Chassis in Duanesburg (Schenectady), NY. Buddy Abatiello, he builds all kinds of drag race vehicles and is a...
'57 Chieftan, shaved door handles, lowered continental kit,rolled and pleated interior and louvered hood!
Pink Pontiac! Actually Salmon.
Just to be a jerk.....I believe this car is a 1960 Ford!
Earls, sells a flare saver that is made of dead soft aluminum and in cases where you can't get a good seal they work great. They are used in the...
We sell Rodsville, an almost exact copy of a Halibrand but better. Rodsville is better material, thicker where it should be thicker and is...
My mild custom is a '57 pontiac. Lowered 2 1/2", shaved door handles, louvered hood, continental kit, skirts, rolled and pleated interior. Stock...
Never mind the book.... It is always wise to mock everything up before starting your build. with the body located and radiator in place, take lots...
The seals are driven into the axle tubes dfrom the large end....they have to be driven out from the small end. You can make a simple tool using...
It is from a 1917 Webley Vickers 2010!
Here was mine!
My partner Ron and I do these all the time. we do it differently than most, as we open the center of the Buick drum to 4" so that the later hubs...
Bolting later Ford brakes to you model A rear is as simple as cutting the backing plate so that it clears the spring perch on the housing. You...
I for the life of me can not understand anyone going to a GoodGuys show and paying 85.00 or so to put their car in a show where Meadors charges up...
The kingpin inclination is different.
Come on! This is Hot Rodding.....we can do anything!@
About 5 pounds
Pontiac Grand Prix circa 62 63
I think it is pond scum green!
I use Fuller Frame and Axle in Hampton Va. Jackanddeuces here on the HAMB Jack does a great job!
There is one on eBay right now!...
Turnipseed only kills Porsche Spiders (Spyders)
Welcome aboard!
Separate names with a comma.
The Jalopy Journal
