The Jalopy Journal
I would love to give out his details but unfortunately don’t know who built the motor. It came as a rebuilt motor to the guy I bought the car off....
Apologies for upcoming rant:(:(:(:(:(:( So todays outcome was quite shit really Trailered the car 200mile to Jim Turnbull of Royal Kustoms to...
No need to buy new parts. Just cut it shorter with an angle grinder.
[ATTACH]
Got one in my coupe. Seems to be working fine. Keeps a steady 80-85c with the flathead [ATTACH]
Exactly why I have them because a lot of people don’t seem to pay much attention when driving
Sorry but needs must. Some British drivers are crap:)
All grounds are good. Everything inside goes to a ground stud which is connected directly to the battery.
Bought the twilights ages ago. Just need to get them working correctly. :rolleyes:
Y
Thank for the help. Much appreciated
Ok thanks. I’ll disconnect the 3rd brake light wire from my system and hopefully it’ll be sorted. Thanks
Going to change out the column to a generic GM column. So hopefully be able to sort it out with that one. For the time being I’m running without...
All Rebel kits I think have the same rear light setups. Left turn Right turn 3rd brake light Tail lights I think what you mean is I just need to...
Greetings all A little help needed. I’m running a Rebel wiring harness with LED tail lights. Now in the kit there is only one rear stop light...
Just buy springs with the proper spring rate and length. Springs should never be cut
First real outing for the Coupe today. A few niggles sorted out yesterday so went for a spin earlier. Definite grin factor Stopped for a pint on...
A few more jobs ticked off the ever decreasing list. Door glass fitted( waiting for vent glass seals), seat bolted back in. Unfortunately got to...
Yay progress :):):) Front end on, wiring more or less finished,windshields in. Also ran the motor for 3 hot/cold cycles for torquing the heads....
Before[ATTACH] After [ATTACH] [ATTACH]
New gauge pod made(Smiths gauges) using the original mount as a template [ATTACH]
Blimey even more done:) Gave the running boards a coat of matt varnish to stop them perishing anymore. The rubber is original so thought the...
Got the rear fenders back on and machine polished. Looks bloody smart even if I do say so myself Does anybody know the height from the bottom of...
Luckily I’ve got an understanding wife
Yay progress. Engine back together after fitting a full flow oil system. Engine remounted in chassis(final time hopefully), exhaust refitted and...
Thanks for your input. Any thoughts are much appreciated. I had a similar problem on a past build. I might make up a barrier with a heat shield....
Never had a problem getting parts from them over in the UK. Found Mac’s Auto to be the quickest Have tried for about half an hour the phone...
see if anybody could help out I’ve got a heater to plumb in, in my 40 Coupe and was wondering where to take the pipes off. I’m running the...
Exhaust all finished. 2" Stainless System with no mufflers Just got to pull the motor again to install a full flow oil setup then it'll all get...
Seems to be going a bit slow at the moment. Little jobs seem to take ages. Been doing the interior and getting things ready for bolting the body...
Separate names with a comma.
The Jalopy Journal
