The Jalopy Journal
Damn, I was thinking something had to be in wrong, can you give me some guidance as to what needs to be done to switch it round?
Just as a note, the trans was rebuilt 8 years ago with later zepher gears, but not used till today, so I'm thinking it may have been put together...
I just got my Flathead in my 32 tudor running, and the trans will not go into 2nd. With the top off I can physically put it in 2nd but when I put...
If you are asking if its a 32 heavy, it is not, but it is dropped about 3.5 inches, and the eyes are reversed, and the top 2 leaves are flipped....
7.50 and 6.00
In my time off the last two days, I was able to get the brakes plumed and bled, ran the fuel lines, set the motor in, got the headers on, as well...
if you do make it to Hampton roads stop in at Harpoon Larry's oyster bar for the best seafood around!!!
Well I just lost my job today, the beauty of being a Government contractor, so I guess I'll have plenty of time to get this thing wrapped up in a...
Very cool Mine should be done shortly!! Got any more pics??
She is officially a roller with steering!, found some NOS tie rod ends and the gave me the clearance I needed, next is plumbing the brake lines...
Some more info for those interested. the run is mostly in South central PA (York Co.) the trip will be a little less than 90 miles, and should...
Announcing the Karb Kings Nomads 1st Annual Reliability Run: taking place in northern MD and South central PA [IMG] Pm me here for more info, It...
Long weekend update, got a ton of stuff painted and began the assembly of the frame and suspension components. Only ran into one issue, the...
Got the motor and trans sprayed last night, and the backing plates and rear wishbone arms done. I'm off work tomorrow so I hope to start assembly!...
Here is my 60 vert I built 10 years ago, don't think I will ever part with this one. [IMG] Factory Tri-Power and A/C [IMG] [IMG] [IMG]
here is the one going in my '32 Tudor [IMG]
Are you having it shipped or picking it up yourself?
Bull shit, I brought my car across right after 9/11. They are just trying to take your money!
Welcome fellow Marylander!
Love it! My 308 is .100 over
Nothing to it, bought my 60 Caddy on Quebec about 11 years ago, they just looked at the registration, and sent us on our way, no import stuff just...
Got all the small parts blasted and ready to spray over the weekend, but ran out of sealer, hope to have the rest of the chassis stuff done by...
After 3 failed Pertronix units in my 32 roadster, running a generator, I'm now using a Older Mag, and could not be happier, the car runs better...
Got a lot done the past week, stripped the car down to the bare frame, and prepped the frame and suspension stuff for paint, sprayed the frame...
Got the Mag dialed in, the little pigtail must have had a diode in it and it was bad, car starts and idles way better, ordered the kill switch...
I attempted to take the car out today, but it was near impossible to start, so I checked the spark coming from the coil and it was very Orange,...
Well I put the unilight that I found in the car as well as a different coil, and the car runs great, I don't think it has ever started easier, or...
Well I'm still using the low ohm coil now with the points, I'm wondering if that is its issue with the higher RPM breaking up, I have a standard...
Yes it was an ignitor II
It had the .6 ohm coil supplied by pertronix, I contacted Don, and will be sending him the module to see if he can figure out something.
Separate names with a comma.
The Jalopy Journal
