The Jalopy Journal
I've never used head studs on any of the motors I've assembled, but I want to use them on my latest buildup. Can someone tell me the proper way to...
The old Agitator still exists...here it is in Canada about 10 years ago. -Scott
No question about it: Wong was Wrong for Whacking his Wang...
I couldn't resist posting this shot. I was able to pose my coupe with the restored SWC car at the NHRR back in June. When Joe Triolo was doing the...
...Hard to tell, but is that the driver coming out of the window? -Scott
[ My 355 has and isky 485 lift, 280 duration solid lifter cam with anti pump ups. -Nick-:cool: I'm guessing somewhere in the 14 sec....
It IS expensive when compared to regular unleaded at the pump, but it's a bargain when compared to race gas or even Cam 2. There's a small airport...
Kirk, I think a lot of 38-39 coupes etc would have been 'updated' with the much more popular and probably under-hood spacious 40-41 front clips...
I've got a '39 coupe with the stock front end. Steering is only hard when you're moving slow. I think a lot of caster will make the steering hard...
I believe 37-42 front clips will interchange on all models...coupe, truck, sedan, etc. Coupe doors will interchange as well. Rear fenders will of...
Peruse the www.gassermadness.com website. Plenty of photos, old rules and guidelines, etc. Should give you a good idea of how they were built,...
Welcome to the HAMB. I'm in Somerset County...perhaps our paths will cross. -Scott
I think I read somewhere that Pete owns the car.
Here's mine. Since this was taken I've removed the passenger seat.
I've done some tapping on a Bridgeport...similar to doing it on a lathe I guess except you're working vertical. Usually I'll drill my hole and...
Cool! That's me in the third vid, black Willys. I broke out in the first round, but we had fun! -Scott
I had it happen to me in a '66 big block Vette. My own stupidity...I was taking a guy for a ride and the throttle stuck because I didn't take the...
<TABLE id=HB_Mail_Container height="100%" cellSpacing=0 cellPadding=0 width="100%" border=0 UNSELECTABLE="on"><TBODY><TR height="100%"...
I warm up my coupe at the strip all the time this way. It has a TH/350 and it shifts through all of the gears just fine when it's off the ground....
I've read all of these posts VERY thoroughly, because I have been trying to solve this very same problem on my SBC for 2 years. Long story...
...And when they're a little older (like mine) you end up with the Nestles Quik containers. They're plastic with a snap on lid-so I use them to...
No...it's a gasser!
Willys with a small block, TH350, 4:89 Mopar rear. Nothing fancy...high compression, big solid cam, Dart heads and a single 4bbl Holley. -Scott
I went through my slips to get these "average" stats: 60' in the high 1.6- low 1.7's 1/8 mi. 7.3-7.5, @92-93 MPH 1/4 mi. 11.5's on up to 11.9's @...
MRAK, Looks good. Bring it over to Somerville some Friday night so I can have a look. -Scott
Here's a shot of the ones I did for a Mopar Rear end. -Scott
...Then there's Island Dragway up in Northern NJ. Not as built up, but they got in a legal battle with the local sod farmer a few years ago. He...
I've been expecting this to happen sooner or later. NJ is blessed with three tracks...Island, E-Town and Atco. E-town is by far the most modern...
Separate names with a comma.
The Jalopy Journal
