The Jalopy Journal
You could always make the brackets in pieces, weld them from the inside edge instead of the outside, then weld the top sections to the side...
Depending on what you're after.....www.half.com has new and used for reasonable. Shipping is usually really cheap also.
I've only used 1 shot in over 30 years. Never had a need to change. Thinners,driers,retarders etc..and especially good brushes make all the...
A very nice *DIY*...
I look at all the sh*t that happens to people and to myself every day. A lot of it not the most pleasant of happenings. Then I sit here and think,...
aluminothermic reaction It does work.....
I sold a 1941 Ford 2dr. sedan to someone back in 1963. It blew a head gasket almost immediately. The car sat for a couple years and I tried in...
Smoke dope, it's your only hope...
Both....
Having painted much flake back in the 60's-70's..... I think a complete car/trk done in flake is gaudy looking. It also requires a tremendous...
If you don't at least change the tires, It's gonna be a little tough driving it around.....
I've done a lot of custom paint over the years as a painter. I'm going to skip the lecture about how adding to much pearl or metallics to the...
Well, that certainly clears it up for me...
Either way, it's a total fucking rip-off!
Replace the glass packs with a straight pipe and internal baffles...
147 mph in my 07 Jetta 5 cyl. with aftermarket stage 2 turbo kit and custom programming.
I did a 51 ford F1 kawasaki green with a medium brown interior.
Try a little on a piece of card board. If it looks like it's questionable, scrap it and buy a new can of filler and hardener. It's cheap insurance...
Hambers are a little touchy........ok, maybe a lot touchy! I'm a car guy, really. I've had so many, in excess of 250 that I can list on paper....
I'm glad that not only are my neighbors aware that I have a nasty Rottweiler, half the town knows it too...Me being the asshole I can be, Im...
I have a similar problem but only in one eye. I went to my opthamologist and he explained it to me. At night or in darkness, our eyeball not only...
Will the complete assemblies work in the opposite doors. Maybe they are installed on the wrong sides? You in bristol...I live a little more east...
Nice...just too bad a lot of nice stuff just sits in the dark for years.:(
Wish I was closer to you. One set of flames I did on a 57 chevy for a friend took best in show at Lead East a few years back....
My brother in law is a model car hobbyist. Trust me when I tell you it is not a cheap hobby...
People always pick on me when I convert to a single wire self exciting alternator.....I do it because there are less things to break.
I would sooooo love to drop the roof on one of these.....:)
I already told you guys, if you're going to call me names, I'm not gonna play and I'm going home.....
Running straight pipes or without and baffles is fine, but it should be mentioned that running without any exhaust manifold at all will burn your...
That'll buff right out...:)
Separate names with a comma.
The Jalopy Journal
