The Jalopy Journal
[ATTACH] [ATTACH] work in progress
I have an original hood with out the handles that I could trace out on paper for you if that would help.
Post a picture of your fender. I have some old fenders that might work for patches . Have both left and right sides
Here is mine it is chopped 3". I had to raise the floor above the rear axle to the top of the frame rails so the rear axle would have clearance...
The measurement is from the inside edge of the fender. The bottom hole is measured from the bottom edge of the fender
Hopefully my picture makes sense[ATTACH]
I have sedan fenders. They should be the same. If you want measurements let me know
Here is mine setback 2 3/4".[ATTACH]
I have almost fine she'd the fenders on my 34. What is good coating to put on the bottom side to prevent stars from stones. I have used a...
Good job. I am glad to be of some help with the measurements.
What are the seats from
If you need anything else I can take more measurements.
Here is all the measurements. The pocket is tapered on all three sides. The top and inside are less of a taper than the bottom. Vertical...
The upper one is for the door latch and the bottom is for the dovetail. Which area do you need [ATTACH]
The indentation is a 1/2" in from the inside of the door. It is 2 3/8" tall on th bottom of the indentation 2 3/4" at top of indentation the...
If you get it unlocked remove the spring on the remote handle this will prevent the door from being able to be locked from the inside. My coupe...
Check the 409 Chevy. I believe it is the front carb for the dual quad motors
[ATTACH] [ATTACH] [ATTACH] the bracket on the radiator for the front and halmoon shaped hole for the rear is what the handles hook on to to hold...
Here is a picture of my original hood sides without the handles. When you you put the handles on the hood you move the spring towards the bottom...
https://www.speedwaymotors.com/1932-Ford-Roadster-and-Phaeton-Windshield-Frame-Plain,763.html
Are talking about so cal speed shop? 3427 E McDowell Rd, Phoenix, AZ 85008
[ATTACH] [ATTACH] Here is my work in progress with a 3" chop and stretched roof. Only chopped the rear window 2".
Here is an adapter to go from 3/8npt to 5/8 -18 straight thread.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] this what I used in my 32. The shifter is for a 1970 chevelle with console. It moves the shifter to the...
Looks like a 58-59 nine inch
http://www.iversenoriginals.com/images/old/3window.jpg try this doesnt have prices on the page
are you sure they are 3/8" I have two original boxes and they are 7/16 -14 threads on both of them
mine also has a bunch of holes. they were covered with a tar like goop. I am sure it was from the factory. I am going to weld the m shut.
let me know if you need anything else
I can get you what you need. I am out of town will be back Sunday and will take some pictures for you
Separate names with a comma.
The Jalopy Journal
