The Jalopy Journal
the cooler lines are looped so it can circulate
I don't yet but haven't driven it other than back and forth in the drive way a few feet. Not enough to get it hot at all.
OK, checked and cleaned the trans filter. Some junk from sitting so long. Put a washer between the converter and flywheel just in case....
I'm using on of those Chinese aluminum flexible dipstick tubes with a plastic dipstick. Who knows if it's showing accurately. LOL Thanks...
I thought I had too much fluid in it. Showed way over full on the dip stick so I drained out three quarts. I didn't have 10 quarts in it though....
I just put a used 350 turbo in my Model A. New filter installed. The trans went into forward and reverse gears and moved ok. After a couple of...
Here's a 29 that I owned for a short time. Didn't like it too much. [IMG]
3.89 gear ratio and not posi
Just use jam nuts and it should be fine unless bad loose.
Did a little looking and the dual lock velcro seems a good way to go.
Any pics of a pitman arm gone bad?
Gearheadbill, that works for me. I just didn't know the difference in Acrylic enamel and Acrylic Urethane. Still don't so I think either one...
I used SW paint once. Sanded it all back off and used the TCP. The Sherwin Williams didn't shine at all. Never figured it out but didn't...
I'm not a good painter at all. I used TCP paint once in Midnight Purple Pearl. It was a single stage paint that made even my spraying look good....
K13 I've heard the same thing. That's why I asked what goes wrong with TCP paint.
Understood. Just tell me why it's a chance. What goes wrong with TCP paint?
da34guy, alrighty, explain why it's junk so I'll know.
Cheep!!!!!! Eastwood has it for about the same price.. TCP has free shipping but Eastwood sends 3 quarts plus a quart of activator or whatever....
Thanks! The urethane is even a bit cheaper from TCP Global
Painters, a quick question. What is the difference in acrylic enamel and acrylic urethane and which is preferable? I like simple.
What is the reason for mounting them up side down? I just don't know. LOL
I didn't stretch mine like the Ebay guy did. [IMG]
I did find this pic. It's more what I have in mind. [IMG]
LOL No sir. That's definitely not what I have in mind.
Joker, surely I ain't the only one that thinks they would look good. LOL
Any body running 55-57 Chevy fenderwell headers (BBC) in a Model A? I want to use them and run flanges under the car for mufflers with block off...
Edelbrocks will almost always flood if you don't use a pressure regulator and cut the pressure down to about 2 pounds.
Well, I decided to sell the axle and keep looking. :) Thanks for the advice. It'll work for me!
George, you're exactly right! A spring may cost me more than another axle though. I have a new spring already for the original Model A axle.
Separate names with a comma.
The Jalopy Journal
