The Jalopy Journal
Three things for proper wiring power switch &Load Draw your own schematic
A cool looking rod for sure that Frenzel is like unobtainable to most Enjoy your dream
Great post of ORS jivebomber
I notched out the firewall and used an electric fuel pump , worked great. You can also use a torch and heat massage and shrink to fit. IMO modify...
Meant CK rider.
CC rider. Great rod I had a high boy with the same stance and chop 40 ford dash and a tucknroll bench seat same slicks my first rod wish I still...
Easy to get those plates yom at a dmv at like Dixon or west sac etc. Or guarantee when you hit the walk in DMV right before they close at 430 they...
I have seen that mill in a supercharged Ford 62 falcon pu a guy has near my work space. He also has a bone stock topolino. With Porsche running...
Looking good I like that Lambo too I have a 59 cushman eagle
copper period
any thing out of a can is just that usually a waste of money unless a hieniken What Petejoe said
I always welded a nut on the broken stud. Let it cool, no quench then use an impact driver and it will spin out.
I bought a 49 Studebaker from a school teacher gal for 23 dollars. We used it to go surfing, put gas in it and thats it ! Going over the summit it...
Great Moraga Jay I can smell the fumes
Scando-navian candy green !!
I have done some of my own and started with a practice cap . Stainless is much more forgiving than chrome. Patience is key I went to my buddy who...
Make sure the front end is below the MC when bleeding meaning if on stands and it is level or raised it will cause pressure to resist and when...
Clay !
I had two 94's rebuilt by Ole's in San Bruno , closed down now, they are so easy and simple to ready for a flat motor. I had them on a Thickston...
Yes on the spacers, figure your engine weight etc and measure. Mine were 1 1/2 inches
I looks like a chin guard goes under the radiator
Don' t change it
Fresca
rear biased tires those look too street rodderish you asked Bottom line if you like it that is your call alone I get guys at the shows say "oh I...
You will need to relieve the radius below the harmonic on the Hurst mount for clearance. I just did my 40 pick up and only pulled the grille and...
Or Ajax and aluminum foil
I have been going since I was 14, now 70. A pal will be in the S P with a 32 5W survivor and his 40 Ford shop PU. This guy's stuff is all off the...
Verns book !!!!!!!!!!!!!!
Had similar problem on a 59 an AB with a flatomatic Only on slightly hitting the gas Turned out the torque converter was loose The real issue is...
WHAT F-DAVE said
Separate names with a comma.
The Jalopy Journal
