The Jalopy Journal
That is horrible. The last thing I ever want to read about. Hang onto the time you had with her and the joy you felt inside when she smiled at...
Thanks. First, thanks to JEM for the part. Can't thank you enough. I lost track of receiving it as it was right when I was moving. I have it and...
How did I go?
I recently picked up an intake manifold from a 69' Camaro Z28/DZ 302 for my SJ 327 I'm using in my 46' Harvester I'm building. I knew nothing...
All that does is confuse me. I'm just gonna take one into a shop and see where it takes me.
Can someone tell me a bit about the wheel studs on the Jag hubs? I've decided to not have the hubs machined down so I can fit my Centerline wheels...
You don't have a driveline or brake lines hooked up????? Just kidding. I built my bed to be a tilt/dump bed so that it will lift up out of the...
The Jaguar XJ6 and maybe other Jags have the motor level and the pinion 3 degrees. They use a 2 piece driveline though.
If the transmission and pinion are at different heights, couldn't they both be set to 0 degrees? The angle of the driveline would be the same on...
I understand both opinions on this and appreciate the info by all. It's why I'm on this site. I think I'm either going to run a 5mm spacer and...
I can always us a Torque Thrust style center cap. Would just need to drill and tap my wheels. They might look good?
It gave me a lot to think about. Still weighing the options.
I'm already running aftermarket wheels and tires on it. Pretty sure the size and offset of these wheels might introduce the same. Thanks for your...
If I open up the wheel, the Centerline center cap most likely won't stay on. In thinking about running a knock-off set/spinners, if they were to...
I'm not using the rear suspension. I have one for a later time but for now I am just going with the front suspension and running a ford 8.8 out...
What about running a spacer just thick enough to avoid the thicker shoulder on the jag hub and maybe a bit longer wheel studs? Something like this...
What other option is there? If i open up the wheel, then the center caps will most likely not stay on, if even at all. I guess I can run some...
Most, if not all, remove some of the shoulder on these hubs. I've never found anything online saying it has caused problems.
So I'm gonna remove the hubs and take them to have them machined down. What is the proper way to remove them? From just looking at them, is this...
I do understand that, but I was under the impression that the original Centerlines like I am using are not hub-centric. I'm sure the best way to...
Finally found a matching set of Centerline wheels for the front of my truck. I still need to get some tires mounted to them to use as rollers...
The whole "almost Bolt-In" thing just means it doesn't take too much fabrication to swap it in. No welding means no swap! There will be a lot of...
I know I will. I will always wonder how much better the ride could be. I still have the rear. If my financial situation ever improves, I could...
Well, guess I'm gonna take my two boys on a treasure hunt. Ill give em both tape measures and we can all 3 hunt down a seat that will work. I'm...
Any chance you could post a pic of the seat?
I'm looking for a bench seat for my 46 Harvester. Tried a caravan 2nd row bench bit its only 47" and just doesn't work. Any ideals?
Separate names with a comma.
The Jalopy Journal
