The Jalopy Journal
[ATTACH] [ATTACH] [ATTACH] If seeing me make one of these makes you think it's a good idea, don't do it haha. I should be done tomorrow but this...
Here's one from a car show I went to this weekend. [ATTACH] [ATTACH]
That looks nice but I don't think we're talking about the same panel Ben. This is what I'm talking about. [ATTACH] [ATTACH] These are the ones...
I started making an inner rumble lis structure. [ATTACH] These are the center part that holds the lid in place. I made them both using a couple of...
Got a little more done. [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] The wheel well flares have got me scratching my head a...
The roof panel had a lot of little holes in it and was pretty thin. Same with the lower part of the panel. All of that will be getting replaced as...
Thanks for the kind words guys. I have about a month of body fab class left before I start paint so hopefully I can get it done. My goal is to be...
I ordered a set of sub rails and extensions because the stock ones were junk. [ATTACH] The cow was next. I need to get this right so I can work...
I was in the Navy for the last 5 years. I got out in December and headed to Rapid City, SD to go to the Hot Rod Institute. I've built cars before,...
[ATTACH]
Wiregrass was the school in Georgia I was reading about. It's in Valdosta, which would be nice because it isn't far from Mayport. I have an AS in...
I dunno what happened to the rest of my post. It was supposed to say: I was looking into The Hot Rod Institute, but I don't want to go to South...
I've been looking around for a little while but haven't found the answers I've been looking for. Can anyone recommend any fabrication schools in...
I finished my seat and floor. This was my first time doing anything like this and I'm pretty happy with the outcome. I bought an old Morse 600...
You can't move them any lower because the bend hits the top flat bar of the folding mechanism.
Replaced the grill and got a top irons kit. It's going to need a lot of modifying to sit the way I want it. I also picked up some leather to start...
Here's some more pics. I started to make a template for a hood. [ATTACH] [ATTACH] Then I brought it into work and cut it out and rolled it....
It's a modified 38 I believe. It clears by like a half inch. Posted using the Full Custom H.A.M.B. App!
I decided to take it off tonight. [ATTACH] [ATTACH] [ATTACH] [ATTACH] I used shaft stops for the ends and put a slight radius in the spoon part...
I wanted to go with a spoon gas pedal, but spending 200 bucks on one just to cut it apart didn't seem like too great of an idea, so I made my own....
Yea I'm an HT. We weld and do plumbing on the ship. I've gotten some weird looks from security carrying a sea bag full if parts on and off the...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Posted using the Full Custom H.A.M.B. App!
Here's a few more pics. [ATTACH][ATTACH] [ATTACH] [ATTACH] I'm going to roll it outside tomorrow and take some more pics. I still have to...
I have a t spring but I'm not sure if I'm going to use it. I was able to get it pretty low with the flipped a spring and removing a couple of...
I originally ordered a set of them but canceled the order because they were going to take too long. I have a set of flanges and a 36 driveshaft...
I can't stand the headers either. As soon as I opened the box I should have just sent them back, but I wanted to start the motor. I haven't...
Here's a few progress pics. I removed the smooth cowl and put my original gas tank in. [ATTACH] I painted the firewall. [ATTACH] [ATTACH]...
I've got the gaskets for the windshield. Is there a gasket between the stanchion and body? Posted using the Full Custom H.A.M.B. App!
Double post
Do you have a part number for the stanchion gaskets. I can't seem to find them on Macs. I knew there was a gasket below the windshield. Is it the...
Separate names with a comma.
The Jalopy Journal
