The Jalopy Journal
The 32-34 spring should curve into mounts. Your mounts are curved, but the spring looks straight.
I am working on the same thing, I bought a king pin set from the Early Ford Parts Store in San Dimas Ca. they have shortened later king pings and...
Excellent roadster. I really like the top as well. I wonder if the bows are reworked stockers or aftermarket?
A 1950 is an f-1. It has the steering shaft under the sector shaft. F-100 has the steering shaft on top of the sector shaft. Also the f-1 sector...
[ATTACH] As mentioned before you can get a 28-34 tie rod and cut the right hand threads off, then rethread to any length you want and turn the...
I have thought about using an old sw amp gauge and putting the volt meter guts behind the face. It would show discharge when off and over on the...
Try turning the tire 180 degrees, if it takes the same weight at that position, I would think the tire is the problem.
No tank, show your quick change.
You need clearance between the spring eyes and perches. A '40 spring should have 48 1/2" between perches. A 35-36 rear spring needs 46 1/2 between...
Wayne Brandon, 517-625-7596 Plymouth doctor restoration parts, Perry , Michigan. plymouthdoctor@aol.com. That is the info I have.
I know there is a lot of force there. I have several old springs I move and throw around from time to time, never have seen that happen before...
The station at Roc[ATTACH]
Buffalo at the Roc[ATTACH]
:)
That is how my starter is built. I don't have that bracket on mine. I will check my ground situation, Thanks.
I was thinking of doing that, still wonder what caused the spring problem.
I have a starter that is set up for 12 volts on my flathead. For the second year in a row the starter quit working. It acts like a dead battery,...
It was nice to meet you Larry. Safe travels. Did you get a picture of that black roadster next to you?
Glad it didn't cause to much damage. The battery disconnect switch is a great thing to have. I put one in the trunk of my roadster, mainly to kill...
One works, one cut down for fan hub[ATTACH]
The 9" has a crush sleeve for pinion depth. I have always set the preload then pull the crush sleeve and turn a spacer the same width the crush...
I have these bulbs in my 31' lights, they work great and work well with a generator. [ATTACH]
Another awesome piece of hot rod history. Hope it stays that way.
Had the same problem, had to set the floats with the carb tops off and feeding with the electric fuel pump at 2.5 psi.
OTB Gear, Inc By Email: rapidfixer2@yahoo.com
Don't know about the Daddy.com thing, it's probably a scam. But I bought finned air cleaners from otbgear about a 1 1/2 years ago and they are a...
My 31 roadster has the stock model a frame with a 49 f1 center crossmember. I am just running a flathead and didn't want to box the frame. When I...
This may be way off, but are you 100% sure it's the seal? I have seen cam plugs leak and look like a rear seal leaking. Just a thought.
Look at Diamondback Auburn Deluxe radials. Bias look radial tires. Available in bias tire sizes. Good tires and good to deal with.
Great save! I'm sure it ran when it was parked. I am starting a '34 p.u. with a hemi. Also my grand parents had a ranch in Napa and Christian...
Separate names with a comma.
The Jalopy Journal
