The Jalopy Journal
Use 60's chevy c10 truck arms
Put some pics of your car up
Thats heaven!!!
no prob man, Also You might want to check out Lil daves motor mounts from Gambino Kustoms, They were actually designed for this same setup and...
I got the same pan with ultra low and made my own mounts biscuit style out of parts i bought and fabbed my own trans crossmember to put the engine...
Running Firestone 670-15, 2 3/4 whites on my 54, Havent driven on them yet but I like the way they look. [IMG]
Of course it will work Fab your motormounts and tranny xmember and mount cut as needed and there it is.
Just make them, I made a set for My car long time ago Got 2 scrap chunks solid alum block Drilled to holes put a peg in one for a locater pin....
I Dig it!!
Need that Shifter Al, Im Getting closer to the finish line every weekend and thats a key component I need money Is Nadda! existent. Any help to...
Heres My Tranny X member and bracket made for my chevy [IMG] [IMG]
I been encountering few instance where Im trying to weld in tight confined spaces where I cant fit in with my welding mask on to see what Im...
Watch out for cameras in the jon when chuck is on!
this place sells a whole kit http://www.hotrodstohell.net/truckarm/truckarm_index.htm
Id straight mob it till the wheels cam off! I dig it
Looks good bro, That bolt on bridge idea looks familiar, Wish I threaded the holes for mine like you did. Top notch work my friend! keep the...
Looks Good John, Love the Stance!
thanks for the help, does that mean that the drive shaft has to be at zero at ride height?
So Im getting ready to 4 link up the rear of my car, With a level at zero on intake and motor set, My tranny is bout 4 degrees down. I think rule...
Few years back Baggin my front end I had an angle grinder get caught up, flew out my hands and hit me in the face . Hurt a lil bit! [IMG]
You can use "sand and sealer" brush on and sand down and repeat as necessary to give a nce smooth base, some use grain filler before the sealer...
Wheres the pics?
Curious if Anyone used a 2 piece driveshaft on their bagged cars, any pros cons etc..? Thanks
Thanks for the help, Even though i dont like it I can deal with the look. I just wasnt sure if a few degrees would be enough to worry about floats...
I know u throw a level on a 4bbl intake to set up ur engine. My question is I set my engine up with a 4bbl manifold with the degree built in to it...
Lemme get a Menfol! looks good bro, real good!
Thank man. I also for got to add that I usually weld a 1/8" solid rod on the front section of the stock peak and shape it down to make the peak...
What they said, Here one of the 54 hoods I did, I never cut the lip underneath out or brace them. Key is be paitent and go as slow as possible...
I know they are nowhere near the caliber or in the same ballpark as you guys but Im workin on it! This is a great thread please keep it goin! [IMG]
Thanks for the Pics Bryan, Your chevy looks fucking fantastic, the pics ive seen dont do it justice, Till next time brutha
Separate names with a comma.
The Jalopy Journal
