The Jalopy Journal
I have a 200 4r in my 60 Vette with a TPI 305, none of which has anything to do with the question at hand except the extreme rearward position of...
I put a 251 in a 41 Plymouth coupe I had in the early seventies, milled the head .080 because an experienced local machinest freind of my Dad did...
I honestly don't know rules everywhere but I have received refilled bottles with some crazy old dates on them sometimes with 25-30 inspection...
A bit of a reality check required here, if the picture is in a magazine from the mid seventies the lovely Candy is probably 55 or 60 and a...
That would be painfull she must have screamed like hell!
I honestly can't comment on their use in combines but I have seen thempower and propel swathers very well.
accelerator pump or power valve
Cabriolet and roadster tops are completely different in operation and design.
I can't believe this is still floating around, 4 years is a long time to keep a bull shit story about a 460 Ranchero running in the 9s going. A...
The great thing is you can use old atf and lightly used thinner and it still works
The black and white photo of the young woman with the little boy in the pick-up is absolutely wonderful, what a wonderfully naturally beatiful woman.
Arc weld (mig or stick) all the way around the race thats left with lots of heat. Wait about a minute and knock the buggered race off. Done it...
I always find there is a reason the valve covers are off when I get car like yours. Drain the oil wash the valve area with good clean solvent...
When was the last time anyone removed their pan in the car, the days of filing rods or mines or removing shims is long gone. If what ever is in...
What are you using for heads and exhaust manifolds? The reason I ask is I tried to put a 365 in a 55 and could not find manifolds to work 331...
Sorry....(in mt hugle opinion) should read (in my humble opinion) damned old fingers on wrong keys and not rereading before sending!
That is a very interesting question! Both are traditional, the 327 is one of the finest performance motors ever made and (in mt humgle opinion)...
If there is any thread left in the hole in that 1/8 inch or so you refered to take a 1 inch bolt that is the right size (3/8) I assume and drill a...
I thought everyone had a Dad like mine, I only realized how really great a guy he was when all of my friends told me how special he was to them at...
rubber belting material comes in various thicknesses, it's durable, relatively inexpensive and relatively easy to get.
You nailed it 58 Caddy Fleetwood special probably the most beautiful 4 door car ever!
Off topic but how do you adapt an AOD to an FE motor?
Sorry but I remain confused the car featured in the photo on page 11 clearly says 427 on the side and the motor is a W motor. How did the 409...
What exactly is the difference between a 409 and the 427 Mystery Motor besides the obvious 18 cubic inches (ahead of the smart asses).
I think you have answered your own question, put the Rochester back on and forget about the Zenith. Those Rochesters were/are good carbs on...
I had a 64 Chevelle SS with a six, the SS package for a six was chrome valve cover, chrome air cleaner cover and chrome dip stick with tube! It...
Ever heard the term "I'm going to do something with it some day". People actually thought they were going to put it back together, some still do!
Some very nice things said here all show what a profound mark Norm made during his personal journey. Met him once in the parking lot in Pamona, I...
I can tell you from experience the quarters are very different from about the center of the wheel well back. Where it connects to the rear panel...
I believe when Chevy went to side mounts in 58 they discontinued boring/threading the center hole, I do not remember ever seeing a post 58 Chevy...
Separate names with a comma.
The Jalopy Journal
