The Jalopy Journal
power meet city vara south vest sweden 2013 took some pictures of the indoor swap meet event.but many took cars and parked outside.
nice a gmc 55-59 tread.here is my all together.not many here in sweden ken sweden
hello from sweden this i got from oklahoma 2012 been sitting for a long time good luck with your car
i have one set 15 inch with clips and one 16 inch with clips seems like you could order with both same cover on both and pontiac poverty caps fit...
i seen a post here about a 833 my6 od trans with colum shift and reverse in dash with cable so 4 on the tree. put gear in 1st and pull the reverse...
took mesurement on my 270 gmc and it have 9 inch between ports and 18 inch between nr 1 and nr 3 ken sweden
minesota cars
the red one is a 1958 gmc
took some pic of a 35 ford cupe here in south of sweden ken
all 3 gmc on one pic and cadillac 1949 up in air removing engine and trans for a 1962 390 cad engine and 700 trans with berdsen adaptor
here is 6x15 in front and 7x 15 in rear bop 8-lug wheels on my 1962 catalina
there is 90% rochester and 10% carter 1957 according to experts and they used the same intake so ponco 60 is right there is one line inside...
yes i use my truck for evreything not a beauty but funktional ken sweden
1958 pontiac had extra blades for ac and continued to do that i think 7-blades summit have a simular i put it on my 1957 pontiac flex-a-lite 40...
gmc -57 palemino pattern in my 1958 gmc yes i use the truck ken sweden
here is mine 1967 400 engine 1960 frontcover tapped onesize bigger than exsisting hole. work just fine.
my -58 had hydramatic and 336 pontiac engine.now 400 pontiac and th700 ken swede
i have 2 gmc stock suspension and the -57 is 4 speed and 16 inch 80 profile wheels i can drive 70 mph . try to get a axle with lower gear .or 31...
wellcome from ystad sweden
ok sorry 57 was on a other place and i have some computer problems allso have the pictures here se if i can post them ken sweden
got sunvisors and door panels today
ok steve you are right about dia on crank my mistake timing cover hole is what s diffrent
pontiac crank is diffrent both in front and rear change is 1963 if you want pic ill take them and timing gear cover is allso diffrent wider on...
crank is not same dia after 1962 i think 1958-1962 is the same ken sweden
i did this on my gmc 1958 using 1967 engine 1960 front cover with same water flow as 1967 engine front mount and stock trans /engine mid mount and...
sorry no more pic of that car but i will try next time i see it no money save on that car owner is a former power magazine publisher.
here is some more pic some cars from denmark have to drive 250miles tond drive the rally 70 miles and ends with a big barbeqe.
pictures from husie rod run 2013 in swedish and danish hot rods at the meet
i will take picture tomorrow this is a old picture of my c 1957
Separate names with a comma.
The Jalopy Journal
