The Jalopy Journal
caddy started as a 4-door and doors is from oldsmobile 1957.steel work on this caddy is amasing and he drive it all the time.extended rear...
hello mesured my 1962 389 and space is on car 34inch between firewall to radiator and there is 1inch space at eachside engine is about 32inch from...
i try to answer others post but it dont work. got a new set of front rims on my 1962 catalina 215X75x15 tires 6x15 rims from BOP
i been driving truck to work for 2 weeks sorting out engine and transmision hooked up tach today and driving 65 mph it read 1350rpm and it drives...
here is pictures with seat in truck i will do the rest of interior next winter i got truck on the road and i will use it to drive to work ken
if it steel or copper bill jenkings advise was to reuse up 10 times? and spray with copper coat. sandwich no i would not.
pontiac i s traditional even mickey thomson used pontiac engines untill gm banned racing in 1963
check between solenoid and power in can be rusty or bad contakt when you clean them put a extra copper plate to add som more thickness the plates...
ok thanks that what i was allmost sure about it is a pump unit pressed together and now i know id of carb so i can order parts.tag is still there ken
i have problem with my accelerator pump is there anyone that have a picture of the carb disambled or how to change the pump rubber . took it...
here is pictures of the truck
ingemars tapserar verkstad tomellila
got the palemino interior today
not the best pic but it is red wheels
wellcome from sweden
got gas filler pipe done had to pull bumper to get it down after fiting it dont have a pipe bender so it was in 8 pices.
i allways beentold to look at harmonic ballancer 1inch thick it is a high performance possible 4-bolt and 010 at the end of cast nr at the rear...
wellcome from ystad sweden
not a pontiac 55-64 u-joint is the same 55-79. but u-joint looks like a cadillac 1949 is it coil sprin or leaf?
hard to find moldings and i dont sell any of mine i have.the are rusty and i dont have any extra to sell
pictures lost in space 2 times
here is pic of diffrence of moldings from a 4-door and 2-dorr. last pic is what i planned to do is a set of pontiac 1953 moldings and adjust...
update today installing a pontiac catalina fuel tank 1961-1964 on my gmc 1958 filler is still in progress but will go on left side of bed.
4-door moldings is not the same radios as 2 door i can take a pic i you want
got engine and trans running now .had it outside in spring sun both yesterday and today.
this happends all the time check at least the front lifters for wear usually 4 front is somhow allmost allways wear more my figure is that oil is...
american order everything on top sometime i find the one im looking for
i have bad threads where the needle goes in
the setup is for a427 chevy bb and seems that level plug on side is lover than 4-barrel.maby a way to get better idle and not flooding. here is...
is there anyone that know how to restore fuel level needle threads in a 2x3 holley carb ken sweden
Separate names with a comma.
The Jalopy Journal
