The Jalopy Journal
Mines really not that hard. It was mentioned that 3/4 did not have the movement I needed. The 7/8 slave and 1” master work well for me. My only...
No replies huh? I’ve found that I need a quick detach type of wheel for my f1 column, any advice? Maybe I could extend it out a bit somehow. My...
Man you are the man here. You remember everything! I wanted to come back and give some feedback since I’ve had the clutch working a while now, it...
Update,did a few things,got the bones mounted at 6* and drove it. No real noticeable change. But I found 2 other problems. One is that my...
What’s it matter? Doesn’t really have anything to do with it No,gigantic actual c10 arms won’t fit under the car.
Read the posts again I stated it does it with or without them,with different shocks too....I guess they aren’t all that shitty
That drag link is very tight. It’s actually new.the ends are not rebuilt but it’s actually all new stuff. I can’t exactly use a tie rod on my...
31vicky... I said it has truck arm rear suspension. That stuff in that picture is long gone.only the axle itself was reused.
Haha I know right, well my caster was a bit much. It put my spring in a bit of a bind and my bones was pretty angled. I’ve got it drilled to 6*...
As I e mentioned it’s had more than one rear end in it. Has nothing to do with the rear end. The front shocks I don’t know,just some chrome...
I didn’t say at all speeds. And I’ll say it yet again. It’s not my drive shaft. I said ‘at speeds’ I’ll except last n this yet again, it can...
That’s what I think also, but I’ve heard some folks doing toe out on these things at times. I just can’t understand why since the wheels would be...
So fellas, I did find that my passenger front tire was a little bit forward of the rest of the car. I’ll be redrilling my wishbone mounts to fix...
I’ve already mentioned that the FRONT is the only thing that hasn’t been changed. I think I mentioned but not 100% sure that I have truck arm...
It’s the whole front of the car moving. Engine/frame everything. It’s mounted on very thin rubber.
I don’t know anymore.. I’m going to put the bones up to 6* cause that seems to be common and it takes some of the twist off the spring. I guess...
Well as mentioned it doesn’t do any of that.. the steering wheel doesn’t move in my hands,nor does the car steer itself in anyway. I’ve also...
Everyone describes it as scary. In my case nothing is scary at all. Not in the least bit. It’s just a shake that I feel in the car that’s annoying...
I just don’t really feel any negatives in the steering at all. It’s all felt in the body. I’ve heard some doing toe out by 1/8, I think that’s...
Haha yeaaaah Isnt bump steer when the steering wheel has input? Cause I have zero of that.not saying it’s right at all. I’m just saying nothing...
Check it out fellas. That much higher is about 5 degrees. Straightens the bones out too
Okay guys I’m going to move my rear wishbone mounts up to get 5* right? I just took them off No it’s not been on a 4 wheel alignment. I try to do...
Hey guys I found something if interest,when I jump up and down on my front splitter,my front axle is twisting with the motion. As in it gets more...
I got the clutch to work! Kinda cool you remember me. I put a 1” clutch master, learned a better bleeding method and it works. Gear ratios suck...
The wear is on the outside edges and very smooth. I e tried different tire pressures. I didn’t seem to get the wear before I lowered the car more.
I said my tires wear on the outside. Not inside. And that I’ve had 4 different wheel sets. All different and all did it. It did it with 40’s drums...
You have a good point.and you’ve given me good advice before.
Thank you!!!!!! I appreciate you understanding. I’m not rude,just slightly frustrated cause I’ve included a lot of the info.I don’t try to be...
I agree with everything you said. I was wondering about the stabilizer. I’ve seen it done this way but wonder if it’s optimal
Yessir, I used to run this car at 5* and a regular crossmember. It still did it. But I added the flat crossmember and obviously my caster changed....
Separate names with a comma.
The Jalopy Journal
