The Jalopy Journal
Yes, they are pre-66 GM seats. The two piece chrome I believe was 64-65 only. Before that, it wrapped over the top of the back. I'm remembering my...
A great story. Glad to see your father kept it all those years.
"The green oil".....
BRAD PENN
Look at the youtube link I posted, you can see how I did it. Although I have my own pipe bender, It's not difficult to get done..
Only some of the Amsoil has ZDDP in sufficient quantity's. I have the list somewhere around. I use Amsoil in everything except the flat-tappet...
This is a cam brake-in. They're 3" Cherry Bombs.... <object width="640" height="390"><param name="movie"...
Didn't know that. Not only trying to weld, but just setting it down like working inside of a car would be a pain in the ass.
One thing you always want to remember no matter what mig you chose, get it with gas capability's. Flux wire welding sucks for the most part. I...
I used to get invites to car shows, but since I never would go most don't bother anymore. This thread DOES bring to mind one car I built in the...
He was in partnership with a friend of mine in that camaro (later than this picture) We used to go up to his speed shop several times a year. I...
Thanks all, No power brakes. I looked at Speedway, but the motorcycle aftermarket actually has a better selection of parts and lines. The last...
Did a search here and otherwise, and didn't come up with a satisfactory answer. I'm ordering brake lines and fitting to do the brakes on my...
Pulled from a field. Ran, but no trunk and mostly no floors [IMG]
For all the older guys around the Fairhaven/New Bedford area does this speed shop owner look familiar?? [IMG]
Go to the link in my post and go to the "Bare Pump" section. They specify what pumps can be run with a 5 HP motor. And they have great prices on...
One word EATON I canned a IR pump that had NO hours on it (LOUD and HOT) and put a Eaton 10 HP pump on it. Very quiet, and big CFM. [IMG] Read...
This is the A gasser spread that was on custom rodder cover. It was an Austin.. [IMG]
[IMG]
[IMG] [IMG]
After reading the other thread here about a rodding mag shutting down I got to thinking about all these old magazines I have stored. These were...
[IMG] 427
I have some issues of those, I should look for them.
I know this isn't a thunderbolt, but it's close. it was an original 64 Ford 427 Galaxie i had years back. factory dual quad, cast iron headers, 4...
That's one of my favorites as well.. Here's mine.. [img]
Install a pertronix unit in place of the points in the stock distributor. You don't need anything extra externally..
Separate names with a comma.
The Jalopy Journal
