The Jalopy Journal
Try this to attach thumbnails. Click on the "Go Advanced" button below. Scroll down to the "Manage Attachments" button. Click "Browse..." and...
Kool project ..... You could post all pics at once using the thumbnails. Gonzalez Kustomz Fab Shop
I always use heavy duty #552 flashers - available at any good auto parts. Also would going to 12V be in your future? ;)
Have him do a lot of practice on scrap pieces. I spent hours and hours in the weld shop while in body & fender school - practice makes perfect....
Started with a rusty bare roof from spending its life outside in eastern Washington 50 some years. Did the CLR/scotchbrite patina treatment last...
You might want to look at the neat way to attach thumbnails. Click on the "Go Advanced" button below. Scroll down to the "Manage Attachments"...
I want to see pics of your shop inside and out. Looks like a vintage building itself. ;)
Good advice. American Made (Rated PER stand). 12 Ton Harbor Freight (Rated PER pair). ;)
We have a winner............ Think shrink.... ;)
Was impressed with this COE cab mount - posts 135 thru 140...... http://www.jalopyjournal.com/forum/showthread.php?t=762207&showall=1 ;)
How old is the fuel in the tank? A new OE pump would have been fine for another 78 years, if replaced as needed. ;)
The '60 service manual you hopefully have already will show ride height dimensions. And like I said - Call Eaton Springs..... ;)
Exactly - Which is why the KBS Coatings products made sense to me, they sell products for prep and stress PREP. Here's the ritual I have been...
You can always have a set of tires with legal tread, to get you to the destination safely then swap on the pie crusts. Your Dart is...
Here's the wagon roof shot in first coat of KBS "galvanized steel" RustSeal coating, still wet. It dried a flat metallic or galvanized look....
Exactly my thought....... Being a family car though - almost has to be a keeper...... ;)
Here's the wagon roof shot in first coat of KBS galvanized steel RustSeal coating, still wet. It dried a flat metallic or galvanized look....
x2 plus custom gage cluster insert....... Unless those qtr panels are going on the truck bed......... Then might as well pimp out the dash...
Related threads: http://www.jalopyjournal.com/forum/showthread.php?t=823756&highlight=air+shocks...
Airshocks are a band-aid. Think about it - puny shock mounts are not designed to support the weight of the rig - not even the rear mounts........
There's a pair of those drum pedals for 99 cents on eBay..... Just sayin'........
Give these guys a call - would not buy springs anywhere else.... http://www.eatondetroitspring.com/
Thanks - Appears to be relabeled Kirker like Eastwoods paint. Looks like it lays down well. Found a big thread on it showing different cars...
What does Summit call their paint, or do you have a part number? Searched their site but no luck.
I like the hammerite too - most recently on the floor boards of the COE - Takes a bit to dry is the only drawback of any Rustoleum paint. Have to...
What - the rattle can marble one is gone - that was educational.... :)
That patina is like my COE that sat 18 years - a little past it's prime by 10 years or more....... and into the heavy rust stage. ;)
Some of the best COE's are commercial rigs - But seems like a shame - this is show quality work.... I guess you will just have to sell pizza at...
Whoa - great progress dude since I last looked. Glad you hung in there.... :cool:
Have done that twice with '40 pickups - but short distances and they were very light compared to the beast he wants to tow. Got one off...
Separate names with a comma.
The Jalopy Journal
