The Jalopy Journal
Glad that I made it to most of them.Show was one of, if not the best.Thanks you Road Agents.
Norm is a reasonable ,wild crazy type of guy.
Power shift to 3rd took it out.Where are all those guys saying they ran a silly sag for years.If you drive them with respect they hold up ,if you...
Call Norman Frick he will make you a set.
Here is the deal when you are high gear ( 1 to 1) the presure on trans gears are mininal. Drive down road and listen to tone change getween 3rd...
He needed to die.
If you want to drive to denville Nj 1 hour rideI will do the job. PM me.
I had the same question about type of metal.Here is the deal heat tube red throw in bucket of water,chomemolly will get brittle almost like glass.
Not sure if this is on topic but you should remove you hidden pot from your shotgun barrel before useing the gun.
That picture is about a small cast iron baffle that is turned and blocking the lelt side of the port. The motor seems to the same with it in...
Look and learn. Went 13.2 like this. comments?
OMG,Bob didn't see this post 1st time around,It was the best of time to be a kid 40 years ago.
Good info here
Credit where credit due Tony Baron is generally credited wiht the idea.
My one roller cam has 5 years street use on it
That is what iI thought untill I profiled all my cams.Just because you have a roller cam doesn't mean it has to have a greater rate of lift(it...
been busy will try to conment tomorrow
Well here is my story.Not sure but this what happened motor is 3 5/16 by 4 3/8 cam is a Crowler roller it was never ment for a blower.It was...
That car gave me wood.
What the point? Some people dream big.They are gunna pull it off.
Grim,myself I kind of like the level playing field of the old iron lump myself. On the other hand Kirby has did a lots of improvements that take...
Some guy don't get the point.If we wanted OHVs we would use one.A good running flatmotor is a rear joy to own and drive.If I have to explain you...
Sounds REAL sweet.
Hang tough,I praying for you all.
It may be early and I have been known screw up,but cam specs are in crank degrees? I keep a motor mock up just to check cams.I know you can...
Let me tell you young guy a secrert.Sometime you have to wait a little for the good stuff.Don't worry about Radir, they are good as gold and will...
Well it IS a car.
Do any know how to play valcuue windshielde wiper? If you guys don't know what I talking about you better ask a greybeard. It is very tradishal...
3 3/8 is '187 over it ani't gonna run hot on you.Looks at some of the old posts on block cleaning.
I can not tell a lie.My kid built the FI setup.
Separate names with a comma.
The Jalopy Journal
