The Jalopy Journal
The easiest cheapest way to do this is to use two relays in parallel, ie: two common 30a relays are capable of carrying a total of 60 amps... (30a...
Sorry - was asleep at the wheel - Versimold is good for temps up to 200 degrees C (392 F) after curing the part....
Don't know if it was mentioned - old stock car trick, if you find yourself on the road and develop a radiator leak, stop at the nearest...
Good question - it is not printable or paintable, however, it does come in colors, one of my buddies has all red rubber parts, grommets, etc. on...
I have an answer for the grommet situation - (and a personal interest in it - sorry !...) We make a product called Versimold - basically it is a...
Yeah, I thought about that, but if something ever happened (ie; hurricane), I'd be screwed...
Well, I spoke with Hagerty... They are willing to insure it, even with limited hauling, BUT - in Florida, it has to be in covered storage... and...
I just saw this on Hagerty.... Modified 1995 and older Minimum value for 1972 and older is $3,500 Minimum value for 1973-1989 is $5,000 Minimum...
Wow, bummer... I was hoping there was a better solution. For sure I need to have the proper coverage, spendy or not... I like my toys...
OK, So I got my hands on a 1948 Chevy ramp truck, it's built on a motor home chassis and has a nice Hodges ramp body on the back, 454, PS, PB, CD,...
I also use the Rustoleum with either DuPont or the Napa brand hardener added, then baked in the FL sun, makes a nice tough finish. The hardener...
Fantastic - I'm fired up !
Hot damn, I figured out a way to be off long enough to make it ! Now I have to figure out how to get registered... I missed the pre-reg deadline...
I'm not missing it again, somehow I'm making it there with the Rambler...
Bitch mittens - nice - I'm definitely going to use that...
Man, that's neat !!! I think a cut/welded beam axle would make me nervous... Is there someone that does this ?
Wow - Thanks for the info, I would have thought they were wider.
I'd love to have a narrow one - 48" probably stuck with a tube.
Wish I could find a bumper ! - it's a 59 Rambler, also can't find the rear window for the hatch (made a lexan one) or the stainless trim from the...
I almost went with spindle mounts because I had a pair, glad I didn't with the way these people drive in south Florida...- the Rockets look close.
I dig it
That's bad in the ass department...
I think your technique could work, but I think often you end up cycling a bubble back & forth... The value of having the end of the tubing...
Nope, not if you cycle SLOWLY, the minimum amount of pressure and suction keeps it sealed, like I said, this is a pain in the butt to set up, but...
I have always bled brake systems in this way; I get 4 half-full (optimist) containers of clean brake fluid. I place one next to each wheel up on a...
I blasted a nitrous line onto the center of the crank to freeze it and pull one off once, worked like a charm...
I just found 2 NOS 3.7 timing covers, let me know if anyone needs them.
I'm a wire nut too - do very similar work, that is clean as hell !! Well done. !
How about a rambler sedan delivery blown gasser - there has to be something different there...[IMG] [IMG]
Yup, that's the conclusion I came to as well - ditched the whole brake setup. Probably dropped 20 lbs. or more in the process - every little bit...
Separate names with a comma.
The Jalopy Journal
