The Jalopy Journal
Thanks OJ! But i can't cut the flange off as the tube is same size right about up to 1" of the flange it then tappers down. The flange was...
I believe Crosley original track width is 40" The wheels i want to run are 4.5" wide and have 0 offset. Tires i'm not sure of yet. I always...
The brake offset on the Vega rear is 2 1/4 I'm running the original Vega drum brakes back on it. I was going to go about 4" from the axle...
Well did some re measuring (Vega) rear is 54.375 Wide Crosley (41.5) (Vega) Rear axle flange to pinion center is 26.75 on one side other is...
yeah that's about right:D
I'm going to re check the total offset tomorrow. And Go over all measurement's again. I would just run tires out side but trying to keep a stock...
I'll measure axles today i believe they were the same length as each other. Brakes are disk now the rear will be drum and front will be converted...
Doing a little more research and seeing that most all GM 10 bolts like the 7.5 where factory offset 1/2" This being the weakling 6.5 10bolt i...
Well I actually got rotors on mine but i do have a rear and front axle out back that has drums but there's only 3 2 front 1 rear. I wont be...
o really? I wish i could find parts around here but i'd have just as much luck finding em in the middle of the ocean
Axle flange to axle flange with drums on for overall width.
It's a 50 Crosley haha Built in good ol Cincinnati Ohio
[ATTACH] Thanks! And actually no that’s factory width for car lol
I’m having the original axle’s resplined.
I'm hoping i got this right? (measuring with drums and from wheel mating surface) Original rear end is 41.5" Wide New rear is...
Yankee-Crosley-Parts is another good source for parts If not listed give Ted a call he'll probably have it. Looking good! I'm building a Crosley...
much as i can it isn't no dime piece so i want to enjoy it much as possible haha. I'm probably over thinking this as i do everything haha
Ok so my car originally had a oil bath air cleaner. As i'm redoing the car now i'm trying to think of the best air filter. I'm not concerned about...
blue loctite should be ok then once i get all threads clean and dry.
Hey everyone i got a small engine from my 50 Crosley and from the factory it came with pal nuts on the connecting rods and dist nut. Now that it...
I got a sbc i'm building and im to the point of lifters my block is a vortec so it has factory roller cam/lifters. I got a new comp thumper cam...
Separate names with a comma.
The Jalopy Journal
