The Jalopy Journal
There should be video's of shrinking disc. They are noisy, dangerous, and they work! easy to pick up by beginners. It is a stainless steel...
Yep! It's SS time.
I have always used Lincoln welders, never had one quit on me. I wouldn't be afraid to get a Miller though. Just get one big enough to weld what...
I would have it professionally reproduced, use the copy and save the original. Follow copyright laws. Decal restorers know what they can and...
My cousin who is a car guy has a drill like the one you have pictured. Whenever he uses it it is plugged in a wall socket where the drill can...
Norm was a good friend of mine, I think he was a good friend to all. I got to know Norm at the Big Cruise in the Rock, a car show that was held...
Thanks for the help. I couldn't find any info by doing a search on both the H.A.M.B. and the net. I know the proper setup is critical for proper...
Here's a pic of my project. [IMG]
I'm sorry for not describing my situation better, it was late last night when I posted this. This is '38 Desoto coupe that the lower body and...
I'm building an old Desoto hot rod with a Dodge truck frame with a 383 and torqflite transmission. This is a project I bought that that a lot of...
It's not like you haven't done this before, is it? (grin) I hope you have a spare blower belt that doesn't get used for a long time. Did you...
Mount it like the lower picture, horizontal. Move it up and to the right center line with the body seam. use the two existing bolt holes and use...
The best way to utilize pcv is to completely ALL oil fumes from engine. The best way is fresh air in one valve cover smoke contaminents out the...
I used to be a hazardous material certified truck driver, purchasing agent, marketing agent, mechanical engineer, electrician, painter, mechanic,...
[IMG]I have a '38 Desoto stock car. It is built with a late '70's dodge pickup chassis (383 I was told) automatic. It has a good title for both...
Sorry, I'm in Illinois and won't be able to help but I do have a question. What's a sloper?
I was getting ready to pull the engine out of a 65 series Chevy truck for a hot rod project. I drove the truck home a couple of miles. It didn't...
That car no way represents Shakey Puddin. Hopefully the buyer gets his money back.
[ATTACH]
It depends how far you want to drive and how much heat you can stand. Yes, your engine from the factory is a 235 unless it was a special order...
Mr. Chevy and Carried Away (hauler) have been invited to attend the GNRS in the 60 year tribute to the Tri Five Chevy's, I hope it is O.K. to say...
Did anybody correct the AMBA, America's Most Bitchin' Award? By the way, the front axle looks like it is 3 tone. Did you hone the holes after...
I'm glad Scottie got it. I hope he's a HAMBer and starts a build thread soon.
The fan blades can be bent a small amount for extra clearance. Yes for larger clearances use spacers. I have adjusted dozens of fans just to...
GMC Bubba here on the H.A.M.B. is a distributor expert, He also knows Pertronix. Another distributor expert is Bob Soucy, (239) 671-3974. If...
If you google Tap Plastics, you will find all kinds of ideas. They sell supplies to make cool plastic stuff with.
I need to dig through some of my old Hot Rod or Rod & Custom. I can see the ads in the back of the magazine as I type this.
I've had radiant floor heat for 5 years. I get cold easy and always feet first. I heat my house with wood from outside boiler. I run my return...
I once beat a 16 car field and never crossed the finish line first.
If there were two identical cars at a car show only one had a small block chevy and the other an inline six, I would spend more time checking out...
Separate names with a comma.
The Jalopy Journal
