The Jalopy Journal
Thanks, I only wish I could paint flames like that
here's a few
If it was the air cleaners being restrictive, then it wouls be rich. But exessive rich wil get the manifolds hot if all of the fuel is not burned...
we got passed by the GT on the way to Hannibal. we were doing 70-75 he passe us doing 85 or so. 10 minutes later a state trooper had him on the...
you shouldn't have a problem using a hardener, especially outside. The parts per million of the bad stuff gets diluted pretty low. It's when you...
post more please! Those are awesome
I am not a fan of leaving the thermostat out as a crutch for a cooling problem. Incomplete combustion, oil contamination, increased cylinder wear,...
running without a thermostat doesn't solve the problem, just prolongs the symptom, if that makes any sense. Post some pics when you have time.
anti freeze is recomended to raise the boiling point. What degree stat did you install? You probably won't get one to idle and stay at 160*...
Actually it was Bosch who invented and perfected mechanical fuel injection in the late 30's. They used the CIS system in Mescherscmidt airplanes...
In the "real" parts store I used to work at they were not in an isle, they were behind the counter and 20 feet of catalogues. Our local Napa is a...
I've read this post with interest as a guy I just met has a couple of 413's in a house boat. Other than the reverse rotation, are there any...
In front of an F-4 Phantom
Blown Olds with 6 Strombergs
Worn distriutor bushings? Try checking dwell at idle and in gear, should remain constant. If the dwell changes, then the timing changes. Also...
I had an older GMC that used something totally different than the 2 readily available carrier bearings. The first time that I changed it I was at...
A friend of mine ran a similar combo in a Bronco, only it was a 351M, 10:1, big cam, Holley strip dominator, 3:50 gears and 38 inch tires. It...
I heard Don Garlits say in an interview once that the 100% nitromethane was very hard on motors. One of his competitors told him to mix it with...
"no, due to the difference in stroke between 302 & 327 (3.0 vs 3.25) the piston pin location has to be different." Should have been more...
Ummmmm, what is a DZ piston? small block chevy 302
Off topic, but why would a DZ piston be more expensive than a 327 piston? Are they not the same???
Separate names with a comma.