The Jalopy Journal
Thanks Crazy. You done good 'ol son.
Radiator cap MUST be sized based on the radiator NOT the engine. Older radiators can not handle the higher pressures modern cars can. If you put...
Since you say "both lines from the master cylinder go into a splitter on the front crossmember" I am assuming you have a dual chamber master...
Check the length of the push rod between the booster and the MC. If too long can cause this problem.
I'd bet that if the local TV news did a story on the stolen gravestones the judge on the case would be "encouraged" to ensure an appropriate...
Try adjusting the brakes on all four wheels until they are TIGHT (drum won't turn) the bleed the brakes using standard procedure. If there are no...
As a great man once said "Do not burden your children by making life easy for them". Hang in and enjoy YOUR new ride.
Can also be used on Aluminum trim to remove anodizing prior to polishing. If used on Aluminum it MUST be removed pretty quickly as it will eat...
Interesting article about Billy Biscoe. Had the opportunity to meet him recently. Extremely interesting chap who's "been there and done that".
I thought I saw a puddy tat. I did, I did see a puddy tat.
Guess us North Carolina boys think alike. Just pulled a short bed off a 76 F150 yesterday using three 2x4s just like shown. Used the same rig...
Sorry Rusty you're wrong. A REAL man has no problem showing his emotions.
Rooster, Based on your photo George is 100% correct. Run them down tight (don't think there is a torque spec.) and run them.
What I want to know is who has the room in their shop for a recliner?
PDQ67, You are referring to the Jet. Some like them but I never cared much for them. Looked a lot like the 54 fords but smaller and uglier.
Blowby, Never-ever strike the end of the puller bolt when removing a hub on a tapered axle. Doing so will brinnel the bearing and require it to...
Check with Lance Walker (Hudzilla) at Hudsonparts.com. He sells used and refurbished Hudson parts for reasonable prices.
Your dog isn't lazy it's a Great Dane. I also own Great Danes (2 Merles) so I know first hand.
If replacing chain make sure to use rated "Load Chain". The stuff at Lowe's, etc. won't cut it.
There is a Pull-A-Part in Charlotte.
Definitely Hudson and definitely post 47.
Welcome from Spencer Mountain.
Email my wife at Magenta124@G(irl)mail.com (drop the irl). She can connect you with several bands that may fit your needs.
Tried sending you a PM but your box is full. Clear your box and repost and I will send you some information on bands that may interest you....
Spencer Mountain, just north of Gastonia.
I use either plexiglass or lexan in mine. Get it at either Lowe's or Home Depot. Cover the inside with a couple of layers of either clear food...
Flywheel/flexplate: same fricking thing!!
You should join the Hudson-Essex-Terraplane club. Great group of folks and a storehouse of information.
1. Check voltage. 2. Check grounds at each light.
Belmont Automotive Distributors in Belmont, NC. I've been doing business with them since the mid 60s (they've been there much longer). Run by a...
Separate names with a comma.
The Jalopy Journal
