The Jalopy Journal
Pretty certain it does. Sent from my iPhone using The H.A.M.B. mobile app
Well I got it to open.. pretty shoddy craftsmanship on them things. Good on ya 31 Vicki, Sent from my iPhone using The H.A.M.B. mobile app
31, I could not get your link to open..? Sent from my iPhone using The H.A.M.B. mobile app
I'm guilty of this , but I figure if someone is slightly interested, or would like more information, they can call .I can do better over the...
Seems like it would, if you can pull it out the wheel end, you could trim it all, weld it up, then slip the outer back over to the original...
[emoji848] well, sounds like you got parts being made as soon as you need... kinda. Sent from my iPhone using The H.A.M.B. mobile app
Not the outer, not the d, but the one between Sent from my iPhone using The H.A.M.B. mobile app
Gotcha. Does that center tube spin also? Sent from my iPhone using The H.A.M.B. mobile app
It kinda looks like you got it?just trim the other inner part, reinstall support, and tack together.. no? Sent from my iPhone using The H.A.M.B....
Willys36, those look nice, your engines sit quite a bit further behind the axle center line , than his does. I know it can be done, but the...
Me either, unless it were a collapsible, but with solid outer, it is just goofy. Sent from my iPhone using The H.A.M.B. mobile app
Brigrat, 4spd floor Sent from my iPhone using The H.A.M.B. mobile app
They generally are not so difficult to take apart. Sent from my iPhone using The H.A.M.B. mobile app
Man ,bummer. Again wish I was close by, I'd give ya a hand. Hell, maybe it can go the other way just enough and there is a c-clip in there.. hard...
The other end of the column, sorry should have explained. It is a Summit brand steering column?
And the other end? Is it welded? Sent from my iPhone using The H.A.M.B. mobile app
It may be a nylon lock ring, kinda like the old GM ujoints. Sent from my iPhone using The H.A.M.B. mobile app
Is it "d" tack welded to the bearing under your little chrome ring that you Cut off? However it is it WILL comeback apart, wish I was closer...
Says magnesium [emoji6] Sent from my iPhone using The H.A.M.B. mobile app
Very detailed plans, but it's redwing steel work.. thanks for the information though.. Sent from my iPhone using The H.A.M.B. mobile app
I'm in. [IMG] Sent from my iPhone using The H.A.M.B. mobile app
Still available. Sent from my iPhone using The H.A.M.B. mobile app
Well, I see all my pics didn't post, but you can look at my profile Sent from my iPhone using The H.A.M.B. mobile app
... I'm always scared to chop a top...just until I do it.. hahaha
Ooops I mis-read, yeah, I'm gonna say you are forward as well, I used the existing radiator mount, mounted inside of it.
Maybe, but I'm gonna say lower.. I built the frame at 34" wide I believe..it's been several years, and it has passed a few hands now, but here are...
Ahh Studebaker, here is my old Stude, But it don't look like the Camaro headers will work for you..[IMG]
If you don't want to or can't Shorten your column on the bearing end, what about a lakes style header kit, pretty inexpensive either way. Sent...
[IMG] Sent from my iPhone using The H.A.M.B. mobile app
Unfortunately I won't make it this year, as my first granddaughter will be born shortly ( due date same weekend), but drove from Quincy the last...
Separate names with a comma.
The Jalopy Journal
