The Jalopy Journal
Take all else springs locks adjusters off and then grab shoe with both hands and use it as a tool to lenghten the upper springs. No need to use...
Shoeboxcentral sells new ones.
You cant go wrong for owning a mercury.[ATTACH] [ATTACH]
With crankshaft or fluid coupling mods you can bolt on 59-60 389 engine.
55-60 bolt pattern is same. 55-56 hydro bolt on. 56 was transition year and im pretty sure newer dual couplin hydramatic had different Size Crank...
When warm, that weight wins spring tension and opens valve. So yep, its stuck closed position.
Just a one example: i had a 350 olds lo comp pistons, smog heads and thicker than original head gaskets. previous owner was looking all sorts of...
Remember to tighten converter nuts?
You wanna handle that thermal insulation carefully, maybe soaked with water because it might be simply asbest.
There are two tubes.one takes fresh filtered air from air cleaner. Thats how it was made in 63...[ATTACH]
Maybe try some sort of resistor in choke coil feed wire to delay heat? Many oem choke wirings are routed via oil pressure sensor that its not...
Holley choke fits autolite just fine.
Its not the choke, you got too small main jets for ours gasoline. And thats just my opinion and personal experience.
https://www.reifendirekt.de/ Vitour 215/75-15
Yes and holley power valve fits autolite carburetor too.
I would recom 215/75-15. Looks good in my LTD which im not gonna post picture, because moderators seem only tolerate french off topic cars pictures.
Went to get some groceries.. Spring is slowly coming here.[ATTACH]
I think i have one spare midland booster, but i dont know if its working, and i might need it myself. I really can take measurements and pictures...
Call pg larsson in tibro sweden. He might have complete booster assembly. Pgbildelar.se He talks english very well.
There are two tyops used.if booster to firewall bra ket has lever system you need short rod booster and if its straight thru to pedal then long...
Try water soaked rag and wood ash. I know it cleans soot from glas very well
If im not totally wrong informet, you need 60 or finer surface ra. Roughness average.. With stamped steel gasket.
Now it would be great time to resurface those exhaust manifolds and head exhaust surface and leave those prone to leak gaskets out. Would you like...
When you get those heads out, check the guide rings for bottoming out.
I bet you are so upset, that you must drink rather large cup of strong tea!
For The kickdoewn shaft seal, its doable under the car but shift shaft seal....well, never donit under the car.detent spring and ball might be...
Yes i have change shifter seal on a multi-drive transmission.need advice? Picture of dissambled one or something? No problem.
Looking good! Have you noticed that fe sits more towards passenger side..
You know the 69 motor will not fit 1960 transmission.atleast not without somekind adapter kit.
I had a ot El Camino.229 worn out linked to th400 and 2.43 rear.215/75-15 tires. Worked just fine.it was not a dragster.
Separate names with a comma.
The Jalopy Journal
