The Jalopy Journal
Dale drove a '55 Ford and, I believe, a Mustang in the 6 cyl. class at Metrolina Speedway.
Gorgeous cars....
Ford didn't build stout frames because of the unpaved bad roads of the day. A flexible frame allowed for a smoother ride... the cars needed to...
During the mid-50's there were colored sidewall tires produced...green, blue, red, yellow... not port-walls. Never saw any but one old timer was...
I dunno either but it kinda looks like my ex-GF....
I hope to be there... not sure just yet...damn work may get in the way.
I have mucho boxes full of wristbands that say... "www.kelleyshotrodparts.com" ....plus I have 8,000 admission wristbands for the Republican...
Ya hey dere...
Here's the Rumblefest band line-up.... Friday August 31st... PABST BLUE RIBBON STAGE 6:00PM Kevin Fayte's Rock and Roll Trio 8:30PM Eddie...
Stick around...lots of good folks here.
Never rust proofed any tubing in any car... are you using some kind of hot rolled tubing that has mill scale?
It's Time... The historic Portage County Fairgrounds in Amherst, WI will come alive with the sights and sounds of vintage hot rods and custom...
http://chevy.oldcarmanualproject.com/fisher/3536fbsm/index.html Look at page 3...
We'll have the track graded this weekend and the safety walls in place for the modifieds to run on Saturday. Then you hoodlums can take your hot...
A Hemi won't fit in an F100....
Buy a trailer and a hitch...
First I'd get the opinion of a KNOWLEDGEABLE person who is familiar with Fords of the era... as mentioned this is pretty much a larger Ford Falcon...
The shift from third to fourth gear locked the forward gear assembly, producing 1.00:1 transmission.[5] The fluid coupling now only handled about...
Why the need for an "update"?
We always had to hide the bass player from the general public... something about prior warrants and such...
Enough oil gets past the seal to lube the bearing... the excess drains from that hole... not much though. If you have a ton seeping out you have a...
Complete? Body only?
Here's a link.... http://www.danielsfamilyfuneral.com/?menuitem=1264&siteid=121&action=1&value=12&obituaries_action=2&obituaryid=125472
He's correct... they used a top loader. So did GM for their 3 speeds for a few years in muscle cars.
I'm not a big fan of clipping these cars but it's been done a million times. The track width is pretty wide for a '40. Maybe an S10 would be...
One year I worked for one of my customers helping him sell the cars I transported to the Hershey Fall Meet. Saturday afternoon he asked me for a...
If it's an early style Hydramatic use it... reliable and locks up in the top gear.
Explorer...
What Bruce said... VIN's started in 1969.
Love to have you...
Separate names with a comma.
The Jalopy Journal
