The Jalopy Journal
Your set up looks good. Unfortunately for me i will not have that unless i rebuild half the car. So i will figure out my best option and see...
I am surprised your highway temp went up. Good tip about the rubber flaps. I have seen these flaps on electric fan/shroud set ups. Yes my fan...
The electric fan is my last choice. I hope the shroud works. Thanks for the info
I bought the Derale rigid race fan but i did not have the clearance. It was too close to the radiator.
The engine idles and runs great. Timing? seems so long ago when i set the timing. I wrote that in my book some where, i will look for that or i...
The distributor has no vacuum advance. [ATTACH] [ATTACH]
The sensor is in the intake behind the thermostat
If the shroud does not fix the issue i think the pusher fan is my next project.
Thanks for all the info.
Thanks for all the info. I will look into Water Wetter
I am running a 13# cap. The temp has gone up as high as 240 which is as high as the gauge goes. The car has not boiled over. The car stays...
The fan is at the lower section of the radiator i can't change that. I am hoping the shroud will force more air through the radiator to fix the...
I can only fit a 15" blade , any larger it will hit the crossmenber
I have a 190 thermostat . The water temp gage and sender are new Stewart warner. I bought them as a pair so the ohms are correct. The temp is...
I am trying to fix a cooling problem on my car . The temperature hits over 220 only if the car is not moving for a few minutes. I flushed...
My 1930 [ATTACH] [ATTACH]
My Top hose is centered. I made a bracket to spread out the radiator support rods to fit the air scoop. [ATTACH] [ATTACH]
I just received my radiator today from US Radiator. Took about three weeks from when i ordered it. They did a great job building the radiator....
I ran a stock 1930 model A radiator with a Ford 289 this year. It was a problem on hot days when the car was not moving. I am waiting for my...
Here is a better picture [ATTACH] [ATTACH]
I will try to find a local shop that can do a nice job. Any one know of a radiator shop in the north jersey area that can make a new radiator?
I feel the grill height seems to work with this unchopped car. But it could be that i have been looking at this car for a few years so it seems...
The overall height of the grill is 32" . I don't think it's been cut down but this is the only grill i have seen up close.
Thanks. I will call Johnson Radiator.
The original radiator that came with my car has seen better days. I think its a modified 1932 radiator. I had the radiator shop test and fix it...
Model A coupe 1930-31 door garnish moulding. Pair of original ford parts 26" long No rust great shape $120 includes shipping lower 48 [ATTACH]...
SOLD. ford spindle and disc brake kit 5 on 4 1/2". 48[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Here is my pick. Took about five years to bring it back to life.[ATTACH] [ATTACH]
Halibrands[ATTACH]
Separate names with a comma.
The Jalopy Journal
