The Jalopy Journal
[IMG][IMG] Getting all the bodywork closer too being finished. Sent from my iPhone using H.A.M.B.
[IMG] Made the front shock mounts and welded them in place. Sent from my iPhone using H.A.M.B.
[IMG][IMG][IMG] Got the rear end back from being narrowed and put it in with the new shocks, and built a battery box. Got the new rear brakes in...
We set the pinion angle with the car at ride height and the rear end blocked in place, and then welded the floater brackets on. With the...
We made them, got the heim ends and wheels online and the aluminum we just had bent by a guy with an English wheel. The steel rods have threaded...
[IMG] Painted the engine and still just knocking out the body work, the doors are done and the rest of the body minus the flipfront and tailgate...
[IMG][IMG] After about 2 days of prep work the whole body is in primer, we spent today getting the doors ready for paint. Sent from my iPhone...
[IMG] Finished the shock mounts and panhard bar so I could take the rearend too a local shop that has the right tools too narrow it. Sent from...
[IMG][IMG] Got some of it in epoxy too keep it from rusting, plan on doing some more this weekend along with some more welding on the frame....
[IMG][IMG] Got the car home last night from the blaster, hopefully the body work doesn’t give us any trouble Sent from my iPhone using H.A.M.B.
[IMG] Welded all the brackets on the rear end waiting for parts too do the panhard bar then it’s ready too be narrowed. Spending the rest of the...
No it’s Not done yet we’re leaving it long until we get tubs ,there’s still metal work too do but we had too get it too the sand blaster this...
[IMG][IMG][IMG] Sent the car off today too get it blasted should have it back by the weekend . Sent from my iPhone using H.A.M.B.
Someone long ago replaced it and overlapped it, long story short we cut it off and butt welded it back on. But the car in the background belongs...
[IMG][IMG] The body is off Sent from my iPhone using H.A.M.B.
[IMG] Spent the thanksgiving break patching rust holes and other metal work, very time consuming and no visual progress but did get the wheelie...
Haha just got it home tonight I had too Sent from my iPhone using H.A.M.B.
[IMG] Sent from my iPhone using H.A.M.B.
[IMG][IMG][IMG][IMG][IMG] Finished up the brake and clutch pedal linkage,might do some adjusting later but for now it’s done,got the master...
Illinois, we’ll be doing some traveling too there races. Planning on making a few a year Sent from my iPhone using H.A.M.B.
[IMG][IMG][IMG] The cage is all in place ready too be final welded, the body will be off soon Sent from my iPhone using H.A.M.B.
[IMG][IMG][IMG][IMG][IMG] Got the door bars in place, made a head rest, and started on the brake and clutch pedal assembly. We cut a driveshaft...
It’s not a whole lot of weight but I cut that main support that runs from the top too the bottom at the far rear of the fender Sent from my...
[IMG][IMG] Got some lightened fenders ready too be attached too the hood. Sent from my iPhone using H.A.M.B.
Yeah that is the block I’m using for mock up and have built aswell. I have a stock 302 too throw in while that ones being built but it’s gonna be...
[IMG][IMG][IMG] Steering done. Gonna start on the flip front, pedals and a few other small things so that the body will ready too be taken off...
[IMG][IMG][IMG] Have been doing a little bit more work on the Ranchero. Cage is pretty well done, seats are mounted in place and steering is...
[ATTACH][ATTACH][ATTACH][ATTACH] Cage is about halfway done, at the point where I need too figure out where my seat is going too continue also...
[ATTACH][ATTACH] Sent from my iPhone using H.A.M.B.
[ATTACH] [ATTACH][ATTACH] Got the motor mounts, transmission crossmember, front end, and mid plate in place. Cage kit should be in within a week....
Separate names with a comma.
The Jalopy Journal
