The Jalopy Journal
Thanks for sharing your knowledge, very much appreciated. Did this conversion run rocker covers?
[ATTACH] [ATTACH] An interesting OHV setup I’ve not seen before, could be common, I’ve just not seen any.
Shame really as they had some really good gear.
The very first
I really like the cap repair, great way to do it
My belief is you don’t need to adjust the body like a normal distributor, you loosen off the bolt on top of the rotor slightly, tap the bolt...
Going R/H drive?
Great thread, I like the cutaway cover
Yeah, as 562roadster said , same number
Cragar also made onel [ATTACH]
Thanks for the replies,, So So sad to hear this, the book he often talked about writing on QCs would have been full of knowledge and experience....
Has anyone heard from Bruce lately, he hasn’t been on here since mid last year , just hoping he is okay. Cheers Chris
Inquiring minds are interested in knowing if your actual question was answered? Did you ever find out?
RSC, thanks again for your input , We can put this to bed now, your picture above tells the whole story. If yours is correct, which I don’t doubt...
Just as feedback to the question, I changed the pressure and return at the pump as they had been put on back to front, The pressure hose has a...
Thanks Rocket Scientist Chris, exactly what I needed, much appreciated.
Thanks for the input, rebuilding the valve is not a problem, it’s relatively simple, as is the pump. My problem is, I have every confidence in the...
What a waste of oxygen, it’s not even about the car really, what’s the point?
Can someone with experience please tell me which port is the pressure port(pressure line from pump) on the power control valve? The 2 ports that...
Cheers Colin, It’s been pretty stressful these last couple of years, literally had nowhere to work on anything and all my gear, and I mean, all my...
My worlds been on hold for 2 years without a shed, or workshop while finding a new home. Last run at it so I finally have my dream...
Some cool cars there! Cheers for the pics.
Also remove some fluid from your master cylinder before all this or your firewall is going to wear it once it overflows.
I once read that using emery tape or fine sand paper can leave residue on the faces causing hot spots, only a points file or the like should be...
What’s the real story? Did this all start after you washed it or prior to washing it? There’s a huge difference in there somewhere. What’s the...
Put ya “Pedal to the Metal”
Gimpy beat me to it, it would shorten the life in the shackle bushings if the urethane ones were in place. That’s the only negative this non...
So you recommend to check the length then,, sorry, couldn’t help that.
One of the best car events around.
Separate names with a comma.
The Jalopy Journal
