The Jalopy Journal
I bought a pump from Napa for my 53 ethanol compatible 39.00 had it overnight.
Danny I have a 1405 manual choke edelbrock, electric fuel pump. When I turn the key on cold start one pump on accelerator cranks perfect. I never...
I am going to try for the 17th every body tells me that is the best day!
You will probably find that the hood wont close properly with the springs on I have had pure hell trying to adjust mine.
Well worth saving, they sure dont make them anymore!
Research stitch lock repairs I have used them on many industrial and automotive repairs
Needs new tach and cam angle gauges. everything else works great. Has no adapters for early model crab or helmet distributors .P.M. me or call...
Little known fact about Foster Brooks, He did not drink! He had me convinced that he did.
I have a nos Ford set, there are two of them made for N series tractors. Work great on F/H V8S.
I have the original master cylinder on my 53,works less than the best! I recommend you convert to dual master cylinder and front discs. Easily...
Look first where You are seeing the sparks, could be a high resistance connection. ( corroded, paint or bad cable) If it was cranking good before...
If You really want to use the one You have I will dig in my distributor cabinet and see if I have the Cap and Rotor. You can have the whole...
Standard Ford has vacuum advance only, I converted mine to small block chevy. Bubbas Hot Rod shop sells them ready to go.
I have a French distributor somewhere in my junk, I bought it at a swap meet thinking it was 8BA I think it came out of a car called vedette. I...
My Brother had one ,had to offset small block to clear the steering. Someone put a torsion bar front end under it .Drove like shit but a great...
Nash is totally different than the flat Ford, the flat ford does use dome pistons.
I run mine without the plug, if you put it in the vacuum cleaner will pull the gloves off. I junked the H/F gloves and bought a good set at Granger.
pull the plugs use marvel mystery in the cyls. rock it back and forth in high gear if the motor moves go ahead and use the starter.
I have a 600 Edlebrock on my bone stock 350 in my 51 F1 no problems runs great
Welcome Hope You enjoy the F1s great trucks !
Just went and looked under my 53, no springs any where on the cables from fire wall to rear end. May be something under the dash I did not have my...
Orange Can, Kano Aero Krull I disassembled My avatar without breaking one bolt! Also use it on stuck flat heads best I have ever used.
That is a labyrinth type seal, no rope used in it. The area you welded is a slinger should be ok if it does not touch the housing.
Saw one at Conroe swap meet Saturday, completely disassembled for 1000.oo. I sure liked the looks it is unique!
Best one I have been to @ Conroe in 4 years, prices good . Found a set of doors for a 40 Chevy sedan ready for paint $175.00!
We will be there saturday
3M used to sell two compounds, one to take off the sticker and one to remove the glue. Don't know if they still do haven't used any in several years.
Rick is right on the ford barn, I think they have sequence in the tech section
When I built mine the hood hinges were just starting to be reproduced, they are part of the heater duct under the hood and are a pain in the...
I have a th400 in my 51 F1 I used the bolt on yoke. I chucked it up in my lathe and cut a seat for a disc type freeze plug, works great. All of...
Separate names with a comma.
The Jalopy Journal
