The Jalopy Journal
Or buy stainless tubing and polish to a Chrome like finish. By skipping the chrome plating the cost would be similar.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] T bucket project including Original steel 27 T body Original steel T bed 1937 Graham supercharged engine Late...
We had a 69 Pontiac wagon and later a 72 Ford wagon that was baby blue with the fake wood that looked exactly like the wood grain shelf liners...
Bump
Btt
[ATTACH] 1995 GM factory manual
If a vane pump is making metal it's gone. And you should always start bleeding a ps system with the engine off and front wheels off the ground.
My son tells me they built a new drive in theater on the north side of Denver. This has to be the first time I can recall of a new one being built.
most parts needed to supercharge a 289 Studebaker minus the compressor. All appear to be in good shape and not modified. From a 1957 or 1958...
I had 2 1965 GTO's an original 389 tripower 4 speed and one with a later 400 4 bbl that I changed to a tripower also a 4 sp
That old Marquette battery charger is ident to the one I just inherited from my grandad. Still works great
Saw this monster while driving through AZ last month
At the dealership ,every new parts guy got the same treatment. We would heat a bearing up with the torch and carry it to the parts counter with...
Also sold as Allstate by sears and Roebuck
Thanks for posting Claymart, grew up just south of you in Adams county. My uncle worked at IH , remember driving past the tower, It didn't...
The old vat-40 Wore out one and bought another
Amps is what you are looking for
I would agree with Steve, can't imagine oil splashing in the valley for another reason with just the pump turning.
What the others are trying to tell you is there has to be a load on a circuit before you will read a voltage drop. With no load( current) , the...
Like the Moose said They were built long before pulse width modulation was invented they are either on or off. No sensor or computer required.
You just built a version of this Kent Moore instrument panel tester that we used to check fuel gauges at the dealership By the way most Gm up to...
My father rigged up an old meat rotisserie motor from a grill that went junk to paint wheels. He could put on as much paint as he wanted and never...
custom wrist pin location is one of the easiest thing to change when making Pistons ( within reason) . We bought a set from Ross when we stroked...
Miami AZ
A bad pinion bearing will growl under hard acceleration do to the side load on the pinion gear. Sounds to me like you have a ring and pinion that...
Thanks guys I know that the T was work in progress from 1908to 1927 so it is hard to keep all the facts straight( for me anyhow), so I thought I...
Going to look at a 27 T tomorrow that is all apart but supposedly all original with title. My understanding is the frame and engine should share...
Separate names with a comma.
The Jalopy Journal
