The Jalopy Journal
Thanks I'm not 100 percent sure what the amp pull is for the individual components, lots of the stuff (ex. headlights) are NOS and didn't come...
I went bigger than I needed to with the wiring, the smallest in the system is 12 gage for the gas gauge and sender. The rest is 10 gage and a...
forgot to mention, headlights and horn run through relays.
Looking for recommendations on fuse sizes for my 6-volt roadster. The wiring is all new and plenty big. I need fuses for the following....
It can help control the direction of the spark shower (keep it out of your face). Also provides better tool control when you have to cut something...
I still have the 2002 street rodder that featured his car. that article / car had a huge influence on me and my hot rod tastes and is the reason I...
sorry to hear of your loss. My condolences
Here's a crappy picture of what I did, I moved the wood support structure to the front of the hump which allows the board to hang over. The seat...
Got mine yesterday...
there are quite a few like that in Montgumerys books. always though that was just a plain old pipe thread plug (like in a 39 trans) . you can get...
and here it is all polished up...
Wow great car! Can we get a separate post going for your car with additional pictures? I would love to see more details, I'm sure I wouldnt be...
Thanks Rich!
Probably no surprise to those in the know, I checked online for room availability at the Wendover Nugget... No rooms available. Is it even...
1935Ron, thanks for posting pics. Is yours the variety that bolts directly to the crank? as in the threaded nut at the back is a part of the drive...
Thanks! the cable looks like it wont work with the tach I have as it has a small female square drive in it...
You wouldn't happen to have pics of the crank nut and related components? I'm pretty sure there is a special crank nut and possibly another...
Thanks!
I have this mostly complete SW tach drive that I would like to run on my roadster, anybody out there familiar with these? Can anyone tell me what...
Bruce, here ya go. McMaster Carr hasem
Recommendations? I was thinking about using a screen with a wider grid. I happened to have this screen already.
Im getting close to finishing a built flathead for my roadster and thought to my self I should probably do something proactive about filtering...
I checked out the weatherhead sight and found a distributor 5 mins from my work I called up and they said they had 47 59x4s in stock so I...
Thanks! There is a difference at the end of the fitting. the weather head has more of a flatish or tapered spot. Macs are threaded to the end...
The ones I got from Sacramento had good threads. This fitting had good threads till I tried to tighten it. It bottomed out in the fitting at the...
Bruce I'm having the most trouble at the carb, if you look at the picture above you can see that the threads are all buggered, no way to tighten...
the compression fitting to carb is a different thread than the brake line...
Not necessarily but still doesn’t get around the compression fitting at the carb..
Im having an issue pluming my dual carb setup using 2 new English 97s. I want to stick with 40s tech so want to go the hard line rout and use a...
Could he have been talking about any of the other bearings inside? like on the Pinion or?. some of the Halibrand qc's have 3 ball bearings stacked...
Separate names with a comma.
The Jalopy Journal
