The Jalopy Journal
Got one on my 34 (sorry don't seem to have any pics of it open) but I always make sure it shut tight before going to warp speed. [ATTACH]
The sleeved cylinder did get an internal residual valve. I have removed the other RPVs . I now have a good pedal with no drag on the front...
Think I will take the valve out. I tell other people only change one thing at a time.
I fitted the sleeved cylinder and valve at the same time.
The calipers were fine when just using the 1 1/8" cylinder with no valve. Calipers only started to drag when using the smaller bore cylinder and...
My cylinder is on the firewall way above the brakes.[ATTACH]
[ATTACH] I have a Chevy pickup master cylinder as pictured firewall mounted it was 1 1/8" on both bores which gave me a very heavy clutch and...
Turtle wax Jet black keeps mine shiny and swirl free. Best thing I ever used on a black car. It's no longer available here in the UK . Time to...
Stock Felpro on a blown 354 Hemi here only 3000 miles so far this year no problems. Ran the same on a small block Chevy for years again no issues....
Here's mine...[ATTACH]
I,ll play.[ATTACH] Blown 354 6/71 & 5 speed.
Ok guys I cocked up. It’s not the box,my steering wheel boss Is catching on the inside of the flared portion on the top of my column. Easy fix....
I have just replaced the Speedway Vega steering box with a Borgeson unit. Feels much more positive but seems tight when straightening up after...
Does this qualify?[ATTACH] [ATTACH]
[MEDIA] I,m quite partial to these boys.
3 pedals & 5 gears. A man too lazy to change gear shouldn't be on the road.[ATTACH]
Gimpyshot rods I did exactly the same thing with the blower on my Hemi.
[ATTACH]
This one right here...[ATTACH]
Anyone know anything about this?[ATTACH]
Dunno why others do it. I did it because I like it[ATTACH]
My coupe rarely but this thing a lot.[ATTACH]
Out in the sun and first test flight earlier this year [ATTACH] [ATTACH]
Yep 100 percent correct.
Running 8:1 compression. Isky 270 mega_hyd cam , 112 deg lobe centres. MSD 6BTM. Running 10 degrees initial timing,28 total all in by 2500rpm. 5...
I,ve run blowers on my rods for years. Just got my first blown Hemi on the road. Got a 354 with a 6/71 and a manual 5 speed. I have underdriven...
Got plenty of room for pedal travel.
Looking into getting my cylinder sleeved down to 7/8".
Separate names with a comma.
The Jalopy Journal
