The Jalopy Journal
Is it possible to use the oem air cleaner with a Weber 32/36?
So that would be a no
Are the bell houSing the same on the 67 c4 and 3.03?
I am rethinking the t5 swap and considering putting a 3.03 top loader in. Does any body know what years bolts to what. I presently have the...
I'm having trouble deciding on white wall size. 1" 2.5" or 3".
I am considering using that tire size too. I like how it fills the wheel well. Does the aspect ratio look ok? I was concerned that it would look...
What size tires are these and how wide are the whites?
How much is this lowered and what size tires are you running?
What about the 67 dual pattern block?
Any body have any experience with gear vendor's overdrive unit?
Yes, I was referring to a bellhousing for a 9"clutch setup
Has anybody used a gear vendor's overdrive unit in their falcon. I considering going that route vs the t5. It would be nice to let the wife drive...
26 cents
Here is the new version from modern drive line. http://moderndriveline.com/Technical_Bits/front-shift-T5-tailhousing.htm
Welcome from Indiana. There's not a lot of midwesterners on here from what I can tell.
It sits little lower than in this pic.
My dad had a 36' 5 window with wood. I might be able to snap a few pics for you.
Does anybody know if the wide pattern bell housing will fit in an early falcon tunnel?
Thanks!
If i had a choice which would be better. I realize the limited slip is basically a positraction.
I bought a set of 14" rims but one is bent. And the local rim shop gave it there two best try's and she's still not straight. Im considering...
So limited slip or open?
As the article says 95'-2001'
I understood that swapping the explorer axle would require shortening the long side and it would also be 5 on 4 1/2 bolt pattern. I just wanted to...
???
Does anybody know exactly which years of the explorer are options for the falcon swap?
What factors going into deciding on the first gear?
I have the oem at 3.50. Basically the higher output of the v8 warrants a lower rpm than a 6 cylinder?
When trying to match a t5 to a drive train. What rpms are ideal at 70mph. I was thinking around 2200 to 2400. My setup will be a 200 I6 with a 250...
Separate names with a comma.
The Jalopy Journal
