The Jalopy Journal
There is a rectangular hole the size of the bolt pattern torn out. I'll have to patch over the hole to make spot to drill holes. Some guys should...
Yes I got mine from Classic Industries in California. They have every related part and a whole lot more.
Thanks for your help.
Hello, could someone tell me how far down the core support the washer bracket is mounted? I'm talking about the plastic part that hangs on the...
Johnny, I did what you said and it worked. Thanks for the teachable moment. Now on to press new bearings and seal it up.
Johnny, I tried what you said and it did the trick. Now to press new bearings on and finish up. Thanks for the help.
It's a 63 under a bel-air with a straight 6 230cu. Thanks to all of you for the reply.
Could someone tell me if the long axle goes on the passenger side? I should have marked them but got in a rush. Also can you use ultra black...
Thanks guys, is there any particular brand to avoid?
Thanks for the help on that. Glynn.
Could someone tell me if the only option for axle bearings is the $135 ones from the restoration companies, or are there alternatives out there?...
I'm a neighbor just up the road about to separate a 36 axle.
Jamco built mine '32 style, but same height as the model A. You need to trim the lower sides up to drop the shell to keep your hood going at the...
God bless Vern for sharing so much knowledge with the rest of us. His new book is awesome, although I don't agree with cutting and welding...
Seen it here before, seller has all the '32 parts you need, dirt cheap just send Western Union payment to the brand new member advertising them....
I tapped them for a 1/8" pipe plugs.
You can see the passenger side hole to plug in the block when you lay the heads on just forward of that head. There's another in the head to plug,...
I've done it. Change to earlier cam, 41 style gear cover and earlier style aluminum gear that changes direction of thrust that is more desirable...
The adam401 thread was the one.
Someone here on the HAMB has and made a good build thread on it. I'll see if I can find it.
The big hole in the center of the juice backing plate needs to be enlarged to fit.
No ones mentioned the smaller bolt circle of the model A. Holes need to be slotted in the backing plates or plugged and re-drilled.
Some one in the Dallas/FW area makes that kit but it involves a lot of other changes. It's somewhere here on the HAMB. If you mount the engine far...
Thanks Alchemy, I think I have most of the pieces, 60 something gen, a pair of 32 hubs and fans, a gen for crank mounted fan, and an 8BA type gen....
Thanks EG I'm not sure if I'll try to move to the later gen maybe early 40's with 2 posts and use the fan hub on it. Can my field coils be moved...
I have a 1932 generator with 12 volt field coils. Can I use a three terminal regulator with it with negative ground? I need to run a generator...
He's here on the HAMB, ROLLINGBONES1A.
Sorry got cut off, RE-bush your spindles and ream with a reamer from one of the suppliers. Fin a 32 or 33 to 34 wishbones intact and make a ball...
Maybe a 39 tranny hooked to a 36 rearend with model A brackets welded to the ends with a shortened torque tube and shaft with a model T spring....
Thanks for the reply , I think I'll try out my adjustable reamers on it.
Separate names with a comma.
The Jalopy Journal
