The Jalopy Journal
Jeff, I have the 50 Merc motor/trans that we can look at for reference. Call me Sunday if you have time and we'll take a look. You can have...
Small rubber washers work great. Can buy at the hardware store, I made my own out of an inner tube. dolsen37
Punch louvers in the top. Allows air flow, looks more traditional and they are not as big as the holes you have marked out. Good luck By...
I would like to be considered. Thanks dolsen37
Thanks HAMB, Problem solved, air in the system. Bled by removing cap and turning wheels several times lock to lock with wheels off the ground....
Wired in a small compressor in the trunk of my old 37. When I needed to pump up the air shocks I just hooked up the hose and hit the switch....
I just sold an original Henry bodied roadster project to a fellow HAMBER. Good news is that I bought a very nice Henry bodied roadster to replace...
Do these boxes need to vent out of the shaft? I noticed the shaft (steering knuckle attaches to) is not solid. Does fluid move up into the shaft?
EXK, thanks for the reply, no it is not your kit but I did research your stuff before I cobbled this together. Dan
Thanks for the advice, yes I did center the box, not sure if lines are hooked up correctly, I'll have to check on that. Dan
I need your help. I started my 50 Merc today for the first time 351 Windsor/AOD. I installed 99 Jeep Grand Cherokee power steering box (went in...
Looks good Mike, I'll have to stop by and see it in person. Dan
Very sorry to hear this Gary. I remember putting a dent in one of my older cars years ago. Car survived from 1938 to 2000 without a dent and 5...
chromeplaterjosh Great work!
Just went out and measured them for you. Keep in mind I was by Myslelf so measurements are the best I could do alone but they will give you an...
Yes they will both work fine.
Thrashing on the Merc to try to get it to Mick's Merc gathering. Needs exhaust, glass, alignment, etc. Just started vacation today to we'll see...
I can send measurements in the morning if that is what you are looking for.
Nick, Just sent some $$$ to paypal account, hope it helps. Just so you know Mike Lewis is down there as both his Mom and Dad's family live in...
You South O Guys have all the great ideas.
Affordable Street Rods, Rich Fox, Midwestern guy that can make custom adjustments to your kit and will send diagrams.
Count me in for the Show/Dance. dolsen37
I like the all thread idea to lower the roof. I used bed rail with a clamp but you have a great idea there.
Now your taliking, can't wait.
Very proud of you Dick. Good job and great car. Dan
Car looks great in person, paint it the color you want.
You can't quit, it's a sickness. You might be able to take a break but you can never quit.
Just bought my Son a copy for his third b-day. Can't wait to read it to him.
Try flathead rubber motor mounts. they are a pretty thin rubber donut type ring .
Love the purple wires.
Separate names with a comma.
The Jalopy Journal
