The Jalopy Journal
Does anyone have a picture of the cover plate that is mounted over this opening in the door? Should be the same for Ford and Mercury 52-53.
This worked for me on my 53' 6 V Merc: Take this for what it is worth...I have a 6 volt POS ground system in my 53' Merc...I installed...
Would anyone have the dimensions for the striker plate for the convertible top limiting switch? 53' Merc
Would anyone have the dimensions for the striker plate for the convertible top limiting switch for a 1953 Convertible? Sorry can't figure how to...
I am too much of a purist so I will have the 6V forever. It gets allot of comments at shows and cruses. The only drawback so far is the headlights...
When I was looking for it I thought it would be flat.
Here it is
If you notice in my picture, there are two holes not used. From talking to others, it has been determined that this was where a plate was mounted...
Does anyone know if the tabs for the convertible header windlacing (53' Merc in this instance) are being reproduced? None of the aftermarket...
One final update. The motor is back together, and runs but slowly. Even with all the cleaning, the disassembly and the reassembly, the new parts...
You don't happen to have source for REDMOND parts catalogs? The were the mfg for most the electric motors for the auto industry from the 40's...
Rick: I will agree with you 100% as long as the motor is in the car and hooked up to the relay, power and switch. What I am doing is a bench test...
Bench testing power window motors - 1953 Mercury Convertible Thank you Tom from the Nation Forum of the Early Ford V8 Club for the folowing....by...
Thank you Tom from the Nation Forum of the Early Ford V8 Club for the folowing....by the way it does work: The best way to test the motor is to...
I want to test the window motor on a 6 volt battery, off the car. The 4 leads are red, black, white and green. Black to pos (+) Red to neg...
I want to test the motor on a 6 volt battery. The 4 leads are red, black, white and green. Black to pos (+) Red to neg (-) White to ?...
Thanks guys.....The moter runs fine, the issue is the brush holder...here is my prior posting:...
Does anyone have a source for the parts for the A.G. Redmond electric motors? This is the motor that was used for the power windows on the 53...
One last try for the year: Still looking for this convertible top piece.
Solo 909: What you have is 2 bbl Holley 1901 (the 4 bbl came on the Y block) that many like to call the "Towering inferno" due to it propensity...
Thank you for the heads up on this part, but this is the opposite side (there is a left and a right).
The only number I can find is a fax number: (860) 646-1272. I called information and nothing listed. Do you have a website or e-mail address?
John: Thanks, I hadn't thought of brass or bronze. Since the original part is pot metal, I was also thinking of high strength plastic. Roy
Made a crude one out of barstock until I can get my hands on a real one.....I don't have the talent or the tools (weld) to make one from scratch....
Are you talking about a billet of steel and files?
Any thoughts here...convertible top part for a 53 Merc
Yup
I need this piece for the passenger side. It is the part that connects the bow to the side rails. Should be the same for 52-53 Ford or Merc. The...
4th Inf VN 1968-1969
Separate names with a comma.
The Jalopy Journal
