The Jalopy Journal
I am guessing you have the H-Series flathead? If that is the case, I believe that carb will not work. The H-Series distributor is a load-a-matic...
I am using the NGK on my flatty. I have heard that the Champion are no good, but I have never really used them. So I can't speak from experience....
The G series and H series use the same style bellhousing that will match up to the pre 48 transmission with the integrated hogs head. So you would...
Bendtsen's Speed Gems makes one for the 6 bolt bell housing. They also make an adapter for the 5 bolt to 6 bolt bellhousing. You could contact...
Yeah, the Suzuki Samurai has the same bolt pattern, plus the center hole should be large enough. It had to clear the 4 wheel drive hub. Early...
That Peugot suspension is a pretty neat setup. But if you look at it, its not just a regular I-beam pivoted in the center. It is setup more like a...
Those were some good pictures. The Orange Circle is a fun place to visit. A lot of cool antique stores. This reminds me that the Orange Plaza car...
All of the 170-250 had the integral head. It was the Australian 6 that they made with the separate intake. But as another person mentioned, the...
Fordsix is a good forum for the 200. There is a link somewhere on there for Classic Inlines (https://fordsix.com/archive/www.classicinlines.com/)....
I think gold could look really good. I found this thru Google: [ATTACH]
Tretheway, What kind of engine is it? For some reason I was assuming a 46 Ford Flathead.
I would check out Fordbarn. I have seen this discussed over there a lot. But from what I understand is that it will never be true full flow. It is...
I know its not a 46-48, but its basically the same. My 41 Tudor: [ATTACH] 6.00 X 16 on the front and 7.50 X 16 on the rear Its a pain to get the...
Check out Scarebird Brakes. They make conversion kits for all types of cars. They're nice in the sense that the rotors and calipers are off the...
I found this: http://www.easternbeaver.com/Main/Elec__Products/Connectors/312_Connectors/312_connectors.html I'm sure you can get those to work....
Here are two that I saw at car shows. 1) Seagrave Firetruck "Batmobile" 16 Liter 6 Cylinder of pure awesomeness [ATTACH] [ATTACH] [ATTACH]...
I just saw this on Craigslist today: [ATTACH] If I had $500 laying around I would want to buy this. Looks like a good starting point for...
I saw a fellow Hamber's ride (LBCD) a couple months ago at Donut Derelicts in Huntington Beach: [ATTACH] I saw these at the Antique Swapmeet at...
Cruisin for a Cure is going on Saturday at the Orange County Fairgrounds in Costa Mesa. http://www.cruisinforacure.com/ You can also check out...
Here's my 41: [ATTACH] [ATTACH] [ATTACH]
I can do most of the modification myself. It's the brazing or welding that I need help with. I wish I could buy a dual exhaust for my car, but the...
I am looking for someone in the southern California area (Orange County preferred) that can weld cast iron. I have an exhaust manifold for an...
Yeah, the H-Series is hard to find aftermarket parts. You'll have to find someone that can split your stock exhaust. Either that or have custom...
I just found this on eBay. I wish I could afford it....
Is that thing Flinstone Powered?
That is one nice truck. I always liked Ford trucks.
This one isn't really vintage or anything. I saw it at a local car show a few months back. It's a little roadster with a Honda Goldwing engine and...
These are the mirrors I have on my 41. They work nice, but like you said, the body has that taper. So the passenger mirror is really hard to...
If you're able to get your car early enough tomorrow, there's going to be a car show not that far from LB Harbor .It's at a brewery. Ballast Point...
Fatman Fabrication does lowered uprights for your car. http://www.fatmanfab.com/product/dropped-uprights-and-dropped-spindles
Separate names with a comma.
The Jalopy Journal
