The Jalopy Journal
I order to comply with the title requirements for Pennsylvania, I need to have back up lights. Who has a idea?
You told me everything I needed to know. You deserve a big HAMB thank you.
I have a SBC with a casting #10066036. #s up front are 1mo 417 and 6VP. Can anyone give me the plug specs and timing information? Thanks
Here's another one to compare. Just picked up the glass today.
Yes DRuss32, came from 29paul. Its almost ready for upholstery. Been a nice project.
I'm present and accounted for.
I'll try the resistors tommorrow. I paralleled a incandesent light with the led and they work. The leds came with a flasher with a ground wire...
I was thinking that too. 4 leds will flash but two wont.
How do you trouble shoot turn signals? GM colunm, LED signals, led flasher. 4 ways work. Signals light but don't flash. Everything is new.
If you don't go the good tool route, get the line thats on the market now. I believe its called Cunifer. Its DOT approved and much easier to work...
First attempt at machine turning. Used a 2 inch rolock on 1 inch grid.
I think I'm #2 from Johnstown
Need some opinions on the Billet frame mounted tube or the conventional line in the radiator. I like the looks and ease of plumbing with the...
Time to say hello and introduce my project. Spring is here and its time to to put the pieces togather. This RPU was started by a fellow HAMB...
I have one but not quite done yet. I resorted to stainless coragated (sp?) pipe with rubber sleeves in order to get tighter bends.
I have a coil and distributor that calls for a .7 ohm resistor. Can someone tell me if I can use a 1.2 or 1.8 in its place. They are avaible...
I have a 2X1 set up from Langton thats been running for two years now. I have 0 complaints. I can't speak as to the power, but it idles fine and...
Did typical straight front axles have steering stops? A RPU project I bought will turn far enough to bind the brake hoses and touch the headlight...
This is the best time of the year. Stop by OBA36 and say Hi. Next to me is a man that recasts steering wheels.
From the factory there was a tag above the windshield on the passenger side. Also the vin number was stamped on the frame rail passenger side...
I have a Allen Grove Alt. Mtd 200R that would move the alt to the Pass side. Check his web site for pics. $35 plus shipping. Cost me $77
Greetings to all, first post. New to the Hot Rod world. Recently found a Model A unfinished roadster pick-up. I' lost on what to use for a seat ....
Separate names with a comma.
The Jalopy Journal
