The Jalopy Journal
My personal favorite is a 16' trailer also. With a wood deck and sides that are like a foot tall. So many uses, scrap, cars, trucks, furniture,...
Just go and get some wire cutters. Use grinder to grind the face flat, making them into flush cuts. I do this, it's cheap, easy, and heavy duty....
We had an old farm tractor, engine seized up tight. Sat for many years right where it was last parked. Bored one day and looking at it, pulled the...
Why don't you try Easy-Off? Seems like I heard about that somewhere.
Got a 360 Ford engine. Came out of an f250 camper special. Still sitting in the chassis. Runs well, nice and quiet. A freeze plug is rusted out...
Easy off and scotch pad will do it. I've done it before. Get the can with yellow top. Spray it on, let sit for 10 minutes and scrub it with pad...
X2 on the needle scaler. I use one from harbor freight and man, that thing just chews up the rust. I have a large compressor though.
I would leave it and see if it becomes a problem.
that's exactly right. It needs to be attached to vehicle using the hitch. I need to move heavy stuff around the property and pull engines over...
Hell. Nobody told me. I have 3 '69 f250's.
For reference: The 360 and 390 blocks are identical externally. The only way of differentiating between the two, since there are no external...
Yes of course there is value in it. How do you know its a 390? did you do the trick where you measure the stroke with a pencil or coat hanger? all...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] here is one I whipped up, using and old boat trailer axle and a useless on dirt harbor freight engine hoist.
I saw parts of it. I think of the show as an introduction to automotive history. Most people have no idea that Chevrolet, Dodge, Chrysler, etc....
How did you do that?
I am losing my hair already.
stick your arm out to make a left turn, and the person behind you will look to see what youre pointing at and rearend you.
I like those stude champ trucks. Has to have the stepside bed though, the others look funny.
I wouldn't worry about it. People like that will always find something to complain about.
Bootyfab- Ghetto fabrication. Something that does not look like it will hold together. Maybe made from strange parts or scrap. Negative...
I pulled into a gas station in my Corvette with my old lady in passenger seat. Old boy was going on about how he use to have one just like her,...
41 Dodge. Bootyfab front axle. Yermo, Ca.[ATTACH]
not likely going by anytime soon. here is location:...
Saw this on on side if road in Trona, Ca. No idea what it is. I'm sure someone here does. [ATTACH] [ATTACH] [ATTACH] [ATTACH]
My "A" was a Doctors coupe. Until he sold it.
I had a salvage title jeep. Bought it from pick-a-part. Got it cheap and drove the piss out it. It was salvaged because it wouldn't pass smog. No...
A flap. Whoever sells the tubes should have flaps. Basically the same as the cut old inner tube idea but new and thicker.
What's on the tailgate? Even with the rust, it's attracting the wimmins....
It a '53. Buy it if cheap. Set aside for later parts or project.
Well whatever you do, don't explain the right side of the spreader thing....
Separate names with a comma.
The Jalopy Journal
