The Jalopy Journal
Been following this build for since the beginning on here and your website. Like all the otherscomments your attention to detail and DIY attitude...
On my computer for this site I am getting a bunch of red X'x and the display for all pages are messed up and not formatted well. I have looked at...
Work as the head of U.S. Marketing for a Fortune 500 Chemical Company. We sell alot of the agricultural products and seeds that Plowboy works...
I'm also interested in the tire and wheel sizes and a side shot if possible. Car has excellent stance and the headers are great. Thanks,
I was just wondering the other day what the status was on your motor. Congratulations and good luck on finishing it up. One of your early...
Volksrod, I just spent about 45 minutes looking over your website and the long thread over on the VW site. I considered a rear engine car for...
This one comes out of Lee Osburn's old shop by Steve himself. You have to see it in person to appreciate all of the details.
You have absolutely nailed the look on this one............ The fit in the wheel well for the rear is perfect with the 7.50 16's. I look forward...
btt I have also wondered what happened to the project.
In addition to the width of the rear axle, what size are the front and rear tires. I am working on a 30 coupe on 32 rails and think you have...
If I remember the story correctly Pete's mother was named Doris. The license plate is her name backwards. SIROD...
Anyone remember the story of how the custom plate on the Pete Chap (SP) 27t got it's letters and the significance?? One of those pieces of trivia...
Roadstar can you post the number when you get a chance. Also thanks to all for the info on the flat top. I will look at some pics of A's on...
Take a short 2-3 inch long piece of 1X2 lumber and drill a hole slightly smaller than your plug wires in it. Then cut the 1X2 in half thru the...
I know that Brookville and SoCal make a flattop and pinched set of 32 rails for Model A (31 in my case) Does anyone know of other chassis builders...
Roadstar --- What can you tell me about the alternator bracket. Did you fab or is it available anywhere. If not bought, can you shoot a couple...
I just went out and measured my stocker 31 coupe on both sides 31 3/8 at top tapering to 31 at the bottom, go the same on both sides..
Now for the picture.....
For those of you who have never seen a pic. This is the final version as seen in June at Indy. Hank, I can't believe you got rid of it unless...
I am looking for an alternator bracket, Short Water Pump SBC. The only non billet I have been able to find is through Speedway. Anyone have any...
Keep it simple. Buff out the paint, lower it as much as common sense will allow, put on a set of knock off un polished "torq thrusts", 14 inchers...
The best looking 29 roadster on 32 rails in my opinion...
My taste runs partial to A's on 32 rails.. A couple of my favorites...
Just had new glass cut for a side window and it is about 1/8th to 3/16th's too wide for the window to go up and down properly. It only needs a...
Mike, Any more pictures of the detail on the front of the roof. I have often tried to picture the front of an A coupe roof without the visor and...
[ QUOTE ] I agree with most posters , taller front. Lose the 14's , 14'' wheels are too small for these cars im my opinion. The cars that get it...
Zgears any profile shot of your roadster and what size bias plys are you running. Here is another shot of the front straight on. I personally...
BTTT for some feedback. Come on you guys most of the time everyones got an opinion, now when I want one everyones being nice.
I need a new carb for my car and am looking for opinions on the merits of each. I am running a mild 350 SBC, Edelbrock Performer cam, Edelbrock...
One more shot
Separate names with a comma.
The Jalopy Journal
