The Jalopy Journal
I think it's from a 34 chevy. not sure if it's from a truck or not. A friend gave me this one to use in my 32. I will be interested to find out...
Here's the seat. It's from a unknown minivan. I narrowed it 4" in the front so it would fit between the doors. The back is the stock width. It...
In A&P school I had a instructor that had a 396 in his hooked to the stock transaxel. The front and rear fenders were shortened, It was really...
You can see the rust in the upper right hand corrner [IMG]
I got the trunk lid mounted. It is the worst part of the body by far. Mice made a nest between the inner and outer skins which resulted in some...
I got the original hinges mounted in the wood. [IMG]
Me and the hired man will be there.
I hope it will do donuts like your roadster!
Hey PBRme I went to the Greenfield swap meet looking for a hood side but found this instead [IMG]
Yep, He started with 2 cars. these are his leftover parts. His stuff is top notch. I'm on a whole different budget. It came a title with it that...
[IMG]
[IMG] This was the sliver that I removed
I like the ford and Pontiac taillights that you see an allot of coupes. They look good. I'm not a person to put a vinyl bow tie on the back window...
I have never dumped the clutch in a aircraft.
Ironic that I removed a rear end out of my 57 olds parts car and my friend installed it in his 1959 Jaguar. He was looking for a more highway...
Looks cool! I like the video.
PBR, Here's a pic of the dash attach points. The black primer makes it hard to see. I tried to use enough light but let me know if you need...
Here is a side view shows the stance. I still have to shim the body to get the doors to line up. [IMG]
Hey Drivinford. CRIA is my home town. Your coupe looks cool!
The sheet metal was in great shape. I made the floor out of Baltic birch plywood and I broke up some stainless to join the pieces. It's similar to...
Swissmike, Yes if it was on the front Axel I would be worried about the scrub line. The shocks are bolted to the plate, just like the S-10. Just...
I wish it was going faster. Had a blast at the LSR X would like to make it in this thing. The brake pedal is from a White truck. The gas pedal...
Hey thanks, every thing is still loose but it's getting closer. The column shifter works, I made a drive shaft for it, lots of little things. I...
I like the Bias ply look. but the fronts are too tall. so they will get replaced. I want to put radial wide whites on it. I welded a quadrajet...
Here is a picture coming home from the exhaust shop. as you can see I have blasted the body and covered it with epoxy primer. The wheels are 49...
Yea it's suposed to have a chevy. It's a $100 surban 5.7 with a bow tie marine intake. short water pump, small cap HEI. The radiator is for a 32...
It's been a while since I posted any progress. Here is a picture while it was at the exhaust shop. I had 2" duals with 24" glass packs. I have...
I installed a aftermarket 32 ford radiator in my chevy. It fit great. I got one with a tapered top and bottom, not the one for a a chopped shell.
Separate names with a comma.